I'm interested in MAX Cobra Downpipe for S-chassis KA-T and SR20DET just wondering price and how I order
I'm interested in MAX Cobra Downpipe for S-chassis KA-T and SR20DET just wondering price and how I order
Of course, we are working on it, however there's no ETA at the moment. The quickest way to bring cobras in to stock would be a group buy, but a large one, 15 at least. Also the lead time would be around a couple of months.Originally Posted by CMR
I'm interested in front and rear knuckles.
I was looking at the driftworks geos how do yours differ apart from the rear I believe theirs is 30 or even 40mm over your 25mm.
I take it s14 is same for s15?
What kind of time am I looking at for a down pipe delivered ?
You'd have to order from the US store Kris, then you have shipping and import duties.
Will you be supplying high mount intercooler for s14 any time soon? Or am I best off ordering from us site?
Sent from my iPhone using Tapatalk
Yes, s14 and s15 are the same.
Our rear knuckles have spherical bearings all round and has mounting tabs for dual caliper applications. Also, our knuckles can be used with our Toe Control bracket which allows you to tune the dynamic toe change. You are correct on the 25mm rc correction.
Our front knuckles are forged and rears are cast.
As mentioned before, it's not yet available from us. As CMR said, if you need it know, you'd have to order from MAX USA. The delivery time should be a couple of weeks, but it all depends on the shipping method you choose.
The HMICs are already on order and should be available by mid to late March
Brilliant, do you know what price you're going to be doing them for?
Sent from my iPhone using Tapatalk
Yes we do. 235 Eur + 21% VAT and shipping.
Good news. Cobra down pipes are expected to be in stock around March, same as HMIC's.
We will also have front and rear Z32 calipers around the same time.
Excellent news on the downpipes, what price are we looking at?
The standard price will be 380 Eur plus shipping
I'm in for downpipe also
Was on the PSM website reading about the limited angle on the S14 tie rods for oem suspension.
I plan to buy some for my S13 (with s14 tie rod ends) and I'm enquiring on the suitability with coilovers? Is there anything I need to be cautious of or any limiting factors?
I'm interested in the Cobra downpipe.
Our tie rods are suitable with coilovers, only OE suspension and some KWs have problems since they have a lot of droop. A good rule of thumb is that if the coilovers are 50% stiffer than stock suspension, you wont have a problem.
If you are sitll unsure, PM us with the coilover set-up you currently have.
Cobra downpipes are on their way, expected ETA is March.
Thank you! Great info
How much can you get this to the UK for?
https://store.partsshopmax.com/shop/...ust/COBRB.html
Tah very much :-)
Posting Permissions
Reply With Quote
