-
Guest
S13 shocks on s14 stub axles
Hi guys I am looking for sleeves that allow me to fit my s13 coilovers onto s14 stub axles as I have done a 5 stud conversion on my s13. I could get some made but I am up against it for time really any help most grateful
-
S13 'Vert yo
Either drill out the shocks to 14mm and use S14 bolts or go to B&Q and get some 1mm thick 14mm steel tube. It's 12mm on the inside. Cut it to (I think) 4x 30mm lengths and use them as sleeves.
-
Guest
Thanks mate I don't really wanna drill the shocks to be honest
-
Guest
-
Guest
Cheers mate I see in America there's a company that makes them
-
Guest
ive always used some lengths of copper plumbing pipe with a slot ground down its length.
-
Guest
Funny seeing this thread pop up. A day or so ago I ordered some stainless steel tube off eBay for this exact purpose. Was a bit of a trial and error purchase but figured 12mm bolt to 14mm just needs some 1mm tube. Let's hope for an easy interference fit.
http://www.ebay.co.uk/itm/STAINLESS-...2nfEos3J6WLdRg
Last edited by shikari chaos; 04-12-2016 at 23:29.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules