-
Guest
THIS IS IT!! clearout of everything includiing some rare ca18det parts
NOW ACCEPTING PAYPAL DUE TO THE DEMAND
Finally after 10 years of ownership i can finally say the mods have to stop! I picked up my car standard years ago, intending to keep it that way and since then have gone through every stage, body modifications custom maps muchos turbos and i finally have settled for the ~500bhp mark and a car that looks nothing like it originally did now faced with a relocation abroad im looking into the possibility of selling the car if i cannot ship it over so that may be up for sale soon too.
Before I start Id like to give a shout out to:
APT - thanks for the engine
DB Power - Love you babes
FC tuning
MB Automotive
JEZ @ Horsham developments
800BHP
and
a lot of the sxoc gurus - you know who you are especially Jonny Wilko, Shogun,Pointz and Mospin.
Also, I have decided to become a paid up member as not much would have happened without the knowledge held in this forum
so now im selling off everything and will add to the thread as soon as i can. (I run a courier company so free time is difficult for me) so please check back occasionally.
CA18DET Custom made inlet manifold
Based on the CPC and PNT intake manifolds. The CPC one has a habit of cracking under pressure and the PNT one does not fit uk spec ca18s and require additional breathers, so i got my own one made.
Hours of work went into the design of the velocity stacks for the optimum air flow as I had issues breaking the 450hp barrier using the standard intake manifold as it became restrictive at high levels of boost. I ended up having to get the stacks CAD designed and CNC machined (at massive cost) with the rest of the alloy frame hand made to a specific volume, the nicely tig welded all together flattened and polished. I then had a mould made up so it could be reproduced cheaply (again at massive cost) I produced 1 sample without velocity stacks to check fitment - which is also for sale - and 3 finished products one of which is on my car currently.
Using the vacuum nipples supplied, it is a complete plug and play solution which also hides the vacuum lines and idle control valve underneath making things look tidier yet functional. the manifold was pressure tested at 6 bar and held like a pro and i put 2.2 bar through it with no problems at all.
CA18DET Custom made inlet manifold with 70mm throttlebody vacuum nips, PTFE tape and freshly skimmed flange - plug and play £450 no offers
Tial replica 44mm MVR new in box £SOLD
Tial replica 38mm MVS new without box £SOLD
T2 T3 and T4 turbo jackets £40
really do keep the heat in! Titanium basalt rather than normal fibre.
photo nicked from wardy for one i supplied him with
D1 Spec thermo rad cap 0.9 and 1.3 bar £12
GM 3 bar map sensor £SOLD
Haltech 3 bar map sensor £60
Ca18det TPS SOLD
Ca18det CAS (half polished) £10 (pics on request)
Ca18det viscous fan £SOLD
HKS mushroom filter with 4"silicone pipe £25 (pics on request)
Blitz sus stainless mesh filter with Z32 adaptor plate £SOLD
Bailey DV30 recirc valve with some recirc hose (blue) £40 (pics upon request)
HKS (probably copy) SSQV with recirc insert £25 (pics upon request)
Samco silicone t piece for dump valve £10 (pics upon request)
Alloy Rad looks worse for wear, but the cowling soon hides that. It holds water fine. Slightly slimmer than most aftermarket but thicker than standard £50
Haltech ECU e8 with 500hp map on it by VM performance Sweeden (Mobnes old map) £SOLD
All prices include postage and paypal, cash or bank transfer is accepted. If you choose paypal, please pay the fees
more will be added soon so check back occasionally.
thanks
Last edited by user23456; 19-03-2017 at 03:38.
-
Guest
Pm'd about intake pipe
-
Guest
replied
and parts added
-
Guest
-
Guest
100 for rails both sides is it?
Nissan Silvia Spec R Aero S15
-
Guest
yep. for both. but im holding out because someone is interested in the seats. ill let you know if they want the rails or not
-
Guest
Okay mate. Post them and seats?
Nissan Silvia Spec R Aero S15
-
Guest
Seats can be posted but I won't accept any liability for any damage caused. And there will be an additional cost for posting them simply because of the size. Shouldn't be more than £35 to courier but I will need to get a quote
Thanks
-
Guest
-
Guest
parts added
-
Guest
Pm sent, clear your inbox please mate!
-
Guest
price D1 Spec thermo rad cap 1.3 bar?
-
Guest
Missed that sorry. £12 postage included
And inbox cleared
-
Guest
-
Guest
-
Guest
Interested in the turbo jacket, but not sure what size for a T04R turbo? Turns out T4 size
Last edited by doz; 02-09-2016 at 19:18.
-
Guest
yep its a t4. i have a friend who runs that turbo. I test fitted it. something about 500hp and not much rpm creates a lot of heat lol send me a pm and we can sort it out
thanks
-
Guest
Can you send me a pic of the alloy rad please. Also what make is it?
Sent from my iPhone using Tapatalk
-
Guest
-
Guest
How much for 1 seat with S body rail??
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules