Results 1 to 14 of 14

Thread: Rb25 conversion wireing help

  1. #1
    Guest
    Join Date
    Sep 2015
    Location
    Shrewsbury
    Posts
    453
    Rides
    0

    Rb25 conversion wireing help

    Is there anyone that can help me out I am stuck on my rb25 to s13 conversion I originally had a ca18 in there and now I have fitted a series 1 rb25 det I am stuck on the wireing for the gearbox. and what to keep of the original car loom and what to get rid of any help appreciated or even if your local to shropshire and could pop round don't mind paying

  2. #2
    Guest
    Join Date
    Sep 2015
    Location
    Shrewsbury
    Posts
    453
    Rides
    0
    Anyone ??

  3. #3
    Stu@GarageSR, Aberdeen GarageSR's Avatar
    Join Date
    Feb 2010
    Location
    Aberdeenshire
    Posts
    2,865
    Rides
    0
    Speak to Jamie Gardner, think he's still mapboy on here....he has recently got his back after doing the same conversion (I think he did a lot of it himself). In fact, I'll give him a nudge for you now

    Clickme

  4. #4
    Guest MapBoy's Avatar
    Join Date
    Oct 2008
    Location
    Aberdeen
    Posts
    2,865
    Rides
    0
    Hey mate. Got stu's message. Am afraid I bought a plug n play loom from wiring specialties in USA. I chickened out of doing my own loom.

  5. #5
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    I think there's a walk through on here

    Sent from my E6633 using Tapatalk

  6. #6
    Guest
    Join Date
    May 2015
    Location
    Lincoln
    Posts
    463
    Rides
    0
    I've seen a few walk throughs online but the wiring harness mapboy speaks about is such a good idea in my opinion, mays well upgrade everything whilst you're doing it

  7. #7
    Guest
    Join Date
    Sep 2015
    Location
    Shrewsbury
    Posts
    453
    Rides
    0
    Thanks for the replies guys I have had a look at the wireing specialist looms just and priced it all up you can put stuff like your running a z32 airflow meter and it comes with the plug ready on the loom and select what type of injectors your running so I might just go for that, it's coming out at £500 which is a lot but at least it's hassle free thanks again guys

  8. #8
    Guest
    Join Date
    Feb 2013
    Location
    Hereford
    Posts
    571
    Rides
    0
    Quote Originally Posted by chris shrewsbury View Post
    Thanks for the replies guys I have had a look at the wireing specialist looms just and priced it all up you can put stuff like your running a z32 airflow meter and it comes with the plug ready on the loom and select what type of injectors your running so I might just go for that, it's coming out at £500 which is a lot but at least it's hassle free thanks again guys
    Replied in dw forum. Anyone know a user here called fil????

  9. #9
    Guest
    Join Date
    Sep 2015
    Location
    Shrewsbury
    Posts
    453
    Rides
    0
    Cheers mate that would be handy even if I could see his car that would be enough

  10. #10
    Guest
    Join Date
    Sep 2015
    Location
    Shrewsbury
    Posts
    453
    Rides
    0
    I just found that FIL on here but his inbox is full so can't message him lol

  11. #11
    Guest
    Join Date
    Jun 2009
    Location
    walsall/tamworth
    Posts
    6,744
    Rides
    0
    a user on here named 'Norfy' seems to do a lot of wiring loms for people. from what i can make out he does good work for respectable prices.

    i could do it but am stacked out on something else till the end of august.

    on your gearbox you have 3 things to wire. speedo,reverse switch and neutral position switch. if you have the RB gearbox loom just splice the plugs onto your CA gearbox loom. as the CA loom plugs in under your fusebox. you will have some redundant wire like the one for the knock sensor etc.. but just tuck those out the way.

  12. #12
    Guest
    Join Date
    Sep 2015
    Location
    Shrewsbury
    Posts
    453
    Rides
    0
    Ok cheers for that bud I might give him a shout

  13. #13
    Guest
    Join Date
    Apr 2015
    Location
    Trowbridge , wiltshire
    Posts
    75
    Rides
    0
    I know Fil personally and he has his loom made by a user on here I think but I can't remember who.... I've got a wiring specialties loom for my S14/rb25 tho, best thing I ever brought.

    I do have a spare stock engine and gearbox loom tho if you need it...

  14. #14
    Guest
    Join Date
    Mar 2011
    Location
    Longfield, Kent
    Posts
    1,419
    Rides
    0
    https://www.facebook.com/d.a.lperformance1/

    Pretty sure Dal knows his way round rb swapping. I highly recommend him, would be my first port of call on any s body wiring problems


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •