Results 1 to 8 of 8

Thread: S13 s.m.j lost page

  1. #1
    Guest
    Join Date
    Dec 2009
    Location
    Kent/Gravesend
    Posts
    1,061
    Rides
    0

    S13 s.m.j lost page

    Hi guys I've been trolling through my s13 ca18det workshop manual to find out details for this s.m.j if you go to El. 107/108 it gives you all the pins. Lovely but it doesn't tell you what they are. I even went to the general information section where it's talks about the s.m.j and how to read it and gives an example but says refer to last page (fold out page) I'm either being retarded but I don't see this fold out page

    Please help
    Mike

    Sent from my SM-N9005 using Tapatalk

  2. #2
    Guest
    Join Date
    Feb 2004
    Location
    Burton on Trent
    Posts
    11,209
    Rides
    0
    108 IS the fold out page.

    Yes it just gives the number of the pin so you know where it is in the spaghetti junction. Each circuit diagram that has a wire that goes though the S.M.J has the wire colour and pin number.

  3. #3
    Guest
    Join Date
    Dec 2009
    Location
    Kent/Gravesend
    Posts
    1,061
    Rides
    0
    Yeah I had seen and worked it out shortly after I posted. I was hoping there was an easier way lol. What a horrible system. Oh well 2 hours down and I've done most of them

    Sent from my SM-N9005 using Tapatalk
    Last edited by fikemoo; 11-07-2016 at 18:31.

  4. #4
    Guest
    Join Date
    Feb 2004
    Location
    Burton on Trent
    Posts
    11,209
    Rides
    0

    OCD kicked in

    Sorry too late for you fikemoo, but it may help others.

    S.M.J.
    A1A2A3A4A5A6A7A8A9A10A11A12
    B1B2B3B4B5B6B7B8B9B10B11B12
    C1C2C3C4C5C6C7C8C9C10C11C12
    D1D2D11D12
    E1E2E11E12
    F1F2F11F12
    G1G2G3G4G5G6G7G8G9G10G11G12
    H1H2H3H4H5H6H7H8H9H10H11H12
    I1I2I3I4I5I6I7I8I9I10I11I12


    PinPage(s)ColourFunction
    A1EL-37PURetract switch pin 4 to retract relay power feed from engine bay brown breaker
    A2
    A3EL-37BR/WHeadlamp timer pin 10 to retract relay 2 coil and RH motor pin 3
    A4EL-38ORHeadlamp timer pin 8 to RH and LH motor pin 4
    A5EL-37BRRetract motors pin 1 and retract relay 4 (o/p) to re
    A6EL-38R/GHeadlamp timer pin 2 to lighting switch pin 6 and RH main beam
    A7AT-29R/BAuto control unit power from 10A kick space fuse
    A8EF&EC-116,AT-29G/LAuto inhibitor switch power from 10A kick space fuse
    A9
    A10EL-66LG/BRear wash amp and switch to rear wash motor.
    A11EL-67G10A Kick space fuse to headlamp wash timer
    A12EL-67G/YLighting switch pin 10 to 2x diodes M42
    B1EL-37P/BHigh beam warning lamp to RH lamp common
    B2EL-38R/GHigh beam warning lamp to RH lamp high beam
    B3EL-37ORDim-dip pin 2 to diode M42 - retract relay 4 coil
    B4EL-38OR/LRetract relay 4 coil to 2 diodes M42
    B5PD-30YDiff cooler relay 1 coil to diff oil temp switch / check connector
    B6EL-37P/BHeadlamp timer pin 6 to retact relay 3 coil
    B7AT-29G/RAuto O/D lamp
    B8
    B9AT-29SBAuto Kick down switch
    B10
    B11EL-67LHeadlamp wash switch pin 1 to wash amp
    B12EL-67R/L2x diodes M42 to wash amp
    C1EL-37BR/YHeadlamp timer pin 1 to retract relay 1 coil and LH motor pin 3
    C2
    C3EL-50SBKick space 5A fuse to lighting switch pin 25
    C4PD-30LDiff cooler relay 1 power from 15A kick space fuse
    C5EL-37OR/BLighting switch pin 24 to Diode 1 M42
    C6PD-30L/Wlighting switch pins 25,27 to retract switch pin3 and 5 kick space fuse
    C7
    C8AT-29GYAuto O/D switch
    C9
    C10EL-66L/W10A kick space fuse, rear wiper amp and motor to rear wash motor.
    C11EL-62R/LScreen Wash fluid level to warning lamp
    C12EL-67R/GDiode M42 to lighting switch pin 6
    D1BR-34L/YABS control unit pin 18 to Rear solenoid pin 3
    D2EL-37,EL-47,EL-55R/LHeadlamp timer pin 3 and warning buzzer to lighting switch pin 12 also dim dip pin 4 via I11, Side and tail lamps.
    D11EL-53LG/BTurn switch pin 1 to haz switch pin 4 and combination flasher unit.
    D12EL-65LG20A kick space fuse to wiper amp, both wiper motors and wash motor.
    E1BR-34BR/YABS control unit pin 2 to Front LH solenoid pin 1
    E2BR-34R/YABS control unit pin 32 to ABS pin 6 (solenoid power check?)
    E11BR-34YABS control unit pin 14 to ABS motor pin 4 (motor power check?)
    E12EL-5,6LIGN sw ACC to ACC coils relay 1 and 2, Audio, power antenna
    F1BR-34G/YABS control unit pin 35 to Front RH solenoid pin 2
    F2EL-37,EL-48,EL-55G/RLighting switch feed pin 11 to 10A kick panel fuse
    F11EL-5,6B/RIGN sw ON to IGN relay coil, reversing lamps, inhibitor switch and Auto control unit
    F12EL-5,7L/RPower from green engine bay breaker to door lock and power window feed to IGN relay.
    G1EF&EC-108,118,HA-53l/ORAir con relay power from kick space 10A fuse
    G2
    G3BR-34L/RABS control unit pin 29 and ABS warning lamp to ABS motor diode pin 11
    G4
    G5BR-34GY/RABS control unit pin 28 to ABS motor relay coil pin 8
    G6
    G7
    G8EL-62Y/PUBrake fluid levelswitch to brake warning light and handbrake switch
    G9
    G10EL-50R/B10A kick space fuse to fog lamp relay feed
    G11
    G12EL-53G/YFront RH turn light and switch pin 2 to rear RH turn light, haz switch pin 6, inst rh turn light and combination flasher unit
    H1HA-53LGAir con switch to dual pressure switch
    H2EF&EC-88,AT-29,PD-30,EL-58Y/BSpeed sensor
    H3HA-53LG/RAir con Dual pressure switch to fan switch
    H4BR-34LABS control unit pin 17 to ABS pin 5, motor and actuator relay coil power.
    H5
    H6BR-34W/LABS RH front wheel sensor - pin 21 on ABS control unit
    H7EL-62Y/WOil pressure swtich to warning light
    H8
    H9
    H10
    H11EL-50L/BFog lamp switch pin 1 to fog lamp relay
    H12O???
    I1EF&EC-102B/YFuel pump (Incorrectly on EF-EC-102 as H1)
    I2EF&EC-88,AT-29,PD-30,EL-58Y/LSpeed sensor
    I3PD-30,EL-25,EL-62BRBulb check relay power to coil from 10A engine bay fuse
    I4BR-34LG/RABS control unit pin 27 to ABS actuator relay pin 7
    I5BR-34OR/LABS RH front wheel sensor - pin 11 on ABS control unit
    I6BR-34BABS RH front wheel sensor shield
    I7PD-30,BR-34,EL-25,EL-62W/RAlternator field terminal to Charge warning, Bulb check relay coil, ABS control unit pin 15 (engine running detect).
    I8EL-37GDim-dip pin 5 to 10A kick panel fuse
    I9G/W???
    I10EL-37G/WDim-dip pin 7 and dip beam LH to diode M42 coil retract relay 4
    I11EL-37R/LDim-dip pin 4 to headlamp timer pin 3, via D2 to Lighting switch pin 12
    I12EL-53G/BFront RH turn light and switch pin 1 to rear RH turn light, haz switch pin 8, inst rh turn light and combination flasher unit

  5. #5
    Guest norfy's Avatar
    Join Date
    Jun 2008
    Location
    Ashford, Kent
    Posts
    1,283
    Rides
    0
    well done that man

  6. #6
    Guest
    Join Date
    Dec 2009
    Location
    Kent/Gravesend
    Posts
    1,061
    Rides
    0
    Skyshack there is something you might be able to help me with. There is two big 2 pin plugs that are clipped to the smj. Ones blue the other white and have fat white and black cables running from them. What are these? Well I know they are power. But what do they power?

    Sent from my SM-N9005 using Tapatalk

  7. #7
    Guest
    Join Date
    Feb 2004
    Location
    Burton on Trent
    Posts
    11,209
    Rides
    0
    Well this was useful
    Page EL-88 main harness
    M11 to E101
    M12 to E102 (blue)
    M13 to E103 (black)

    Page EL-100 engine room
    E101 S.M.J
    E102 and E103

    (not)
    ----------------------------
    Page EL-6
    B/Y wire, E102 ign switch "start". M12 10A kick space "eccs" fuse. (ECU "start" signal pin 43)
    W wire, E102 alternator output + lots more. M12 power feed to 3 kickspace fuses, interior lights, fog lights, hazard and ACC relay 1 which feeds 4 kickspace fuses for wipers, washers, door mirrors, cig lighter and heater control.

    W/B wire, E103 connected to white alt wire (as in E102). M13 feed to rear window defogger fuses in kick space, spliced to white wire feeding power to IGN relay feeds kickspace fuses for diff cooler, meter and gauges and turn signal.
    W wire, E103 alt etc. M13 power feed to ACC relay 2 for heater blower, feed to 2 kickspace fuses for head lamp retract and side lamps.

    Fairly vital connections.
    Last edited by skyshack; 26-07-2016 at 20:24. Reason: feeds from ACC relay 1

  8. #8
    Guest
    Join Date
    Dec 2009
    Location
    Kent/Gravesend
    Posts
    1,061
    Rides
    0
    Thankyou very much matey

    Sent from my SM-N9005 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •