-
Guest
Another subframe question
I'm halfway through cleaning up my s13 rear subframe and have burnt out the old bushes, Iv had a few searches and it brings back mixed answers but I have some polybushes to fit to the subframe, question is...... Do I need to cut the outer collars out or leave them in?
-
Guest
Depends on the bushes. Leave them in until they arrive. Test and if required cut them out.
Have heard many different things about the bushes. Mine were driftworks ones and needed the collar out.
-
Dorset & Hants Rep
As dukey said! Most do require removal of the sleeve but id leave it until you receive the bushes.
-
-
Guest
-
Guest
Not 100% sure as bought them from someone else but I would say they are flo-flex, from eBay :-/
-
Dorset & Hants Rep
-
Guest
Get your chisel out & start beating out those collars.
-
Guest
Managed to get a collar out but still a little dubious that the metal collars supplied should be tight in the bush and not loose?
-
Dorset & Hants Rep
Didn't notice that! Once they are pushed in maybe they will compress?
-
Guest
Once you fit the bushs into the subframe the metal sleeve in the Center will be a lot tighter a fit.
-
I <3 BBS LM
Wow, they look shit!
All of the well known manufacturers have a sleeve that's a tight fit on the bush. If the bush can compress enough to make those sleeves fit then the material can't be all that stiff...
Last edited by Actual_Ben_Taylor; 28-07-2016 at 14:12.
-
Guest
That's what I was thinking, drift works bushs it is me thinks
-
I <3 BBS LM
Not driftworks (unless they've changed their design)
http://www.driftworks.com/driftworks...me-bushes.html
-
Guest
I think he was saying he's going to get DW bushes, not that he thinks the ones he has are DW bushes.
-
Guest
Whiteline, hard race, powerflex or nismo all the way.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules