-
Guest
Wheel spacers
Hi could anyone help through past experience as to what size hubcentric spacer would be best for a standard wing s14a for now running full top mount negative camber and 9.5j GTR-D RIMS up front offset 25 currently have no 225 40s fitted yet but due to the offset and camber inner lip is touching but on test fitting it looks like 15-20mm will be correct for inner clearance but was just after obviously the best sized spacer for the best stance etc cheers dave.
-
Member
A 15mm spacer will get you down to et10 and that will have a good amount of poke, should clear on the inside with no problems.
-
Guest
Depends completely on the wheels themselves. I just bought some Works for mine - 9j et22 - and they needed a 10mm spacer to clear the caliper, which I was not expecting. They do fit the arch great though with a 205/40 (not my choice in tyre..) and I have zero camber at the moment.
-
Guest
cheers lads appreciate the advise
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules