Great colour combo what sort of money is it to wrap an s13 completely in say black ?
Dropped the car off at my mates garage for him to make me a downpipe & custom intercooler pipework. Here's the 1st mock up picks. Can't wait to see the finished job.
👋 Hi everyone.
I've been concentrating on work a lot recently but the last few days have given me chance to crack on with my car.
I dropped out the engine, box & the complete bay ancillaries.
Then I plated & filled the aircon holes & layed down a coat of primer.
I then spent a day grinding down the welds on my tubs & gave them a skim of seam sealant.
I then gave the front wings a clean, prime & underseal.
I've got a mate helping me with welding in a few plates where the old looms came through the bulkhead & then we are going to fill all the unused holes in the bay & front slam panel.
Stripped, cleaned & painted all the front end.
Stripped the brembos & ordered new pads.
Gonna be one mint looking car dude, keep it up
Still waiting on my body guy to prep & paint my engine bay so I decided to strip & paint engine parts.
So I mounted the rb box on my engine stand & began cleaning with brake cleaner & a wire wheel.
Will paint today & change the output seal just incase.
Gearbox finished & all parts refitted.
I like the attention to detail.
Thanks mate, that's about 6 hours work on the box.
Hoping to start on the rb strip & clean this weekend.
I've ordered new gaskets & seals so after the clean down I can rebuild the engine with no leaks.
Began stripping down & cleaning the RB block.
Wire wheeled & cleaned the block. Removed all the fittings & drain plugs & cleaned them up too.
I'm removing the oil filter housing so I can also do away with the coolant pipes that run to it. I'm going to cut the fittings off & plug weld the steel pipe.
I'm also doing away with the throttle body cooling.
I've just put in a nice order with conceptua which should be here for next weekend.
Looks good.
Looks really good why not do away with filter houseing all together and buy a stud from conceptua and fitt a new housing from conceptua that's got take offs for gauges like oil pressure and temp and doesn't come with coolest pipe fittings so is very neat.
Posting Permissions
Reply With Quote
