S13 compatabilty with other Nissan parts

[oliverdrift92]

Hi guys,

Picking up my new s13 today (my first one).

The brakes need replacing so an opportunity to give a cheap upgrade to them but I have a few questions about parts.

1. Will s15 4pots fit (front)?
2. If so, What if any additional bits do I need apart from the callipers?
3. What are good pads to use (drift and track use, only road driving to track)?
4. Found some secondhand 'Nissan Skyline R33 GTST Drilled & Grooved Front Brake Discs' 295mm in diameter. Will they fit with the s15 4pot callipers?

Some other questions:

5. Will an s14 bolt in fear half roll cage fit my s13?
6. Will an s14 front strut brace fit?

Thanks so much in advance if anyone can help on any of these!!

[AdamRPS13]

1. Yes
2. s15 Discs and pads and braided lines needed.
3. thats a broad question there are many good pads out there with lots of opinions.
4. nope
5. nope
6. not as far as i know.

[Desa]

1 Yes
2 Discs 280mm and would suggest braided lines as s13 ones won't fit
4 won't fit s15 has 280mm diameter, would suggest to put front r33 gtst calipers, bigger discs, aluminum calipers apart from s15 cast iron which gets seized..

[skyshack]

2A Discs 280mm and
2B would suggest braided lines as s13 ones won't fit

2A S14 280mm dia x 30mm thick disc will need drilling to 4 hole. S13 280mm disc is 22mm thick and 4 pot pistons will be overextended on worn pads.
2B: S13 lines do fit if you shorten the banjo bolts so they don't bottom on the S14 internal nipple. Have to file a flat on the calliper for the copper washer to seal on.

[oliverdrift92]

Thanks for all your help guys, that's great!