more questions (I swear i am using google)

[GWtaylor]

Hi team
ok as I'm on my first Nissan s13 I've gone in blind

here goes
what is the Z32 airflow meter is it an upgrade what cars do they come from?

what are lock out rings and how do I install them how many should they be as I got some with the car but no instructions?

I was given a t28 turbo with shaft play, does that mean it's only good for the bin or can it be rebuilt and at what cost roughly

if the above is fixable can it be put straight onto a 1.8 turbo engine without needing bigger injectors or remap?

thanks
Team

[ANDY black s13]

Z32 MAF is fitted to 300zx twin turbo 89>99 A36 000 N62 on the sticker
lock out rings are possibly sub frame locking collars,C shaped one goes inbetween flour and subframe/top of the bush
other 4 washers/collars go underneath google sub frame locking collars for instal pics
t28 with 4 bolts holding exhaust housing to the center core is journal/plain bearing and can be rebuilt
google t28 rebuild kit

EDIT doing 3 things at once as well as replying on here ,z32 maf needs a stage 3 H dev (or similar) chip in the ecu to run the maf
and T28 will fit the ca if clocked, as in loosen exhaust housing and rotate core slightly, soz no time to do links etc

[GWtaylor]

Is the z32 meter classed as an upgrade?

[Loopy_drifter]

Yes a z32afm is an upgrade(its bigger than standard and flows more air), but needs a custom map or a stage3 chip and supporting mods. No need for a z32 for stage2 and below..

[ANDY black s13]

A stage 2 chip uses stock injectors and stock MAF,that will give a healthy engine (good compression readings and not smoking etc)
with a t28 @ 17 psi 280 ish bhp as a cheaper option to the stage 3 set up that needs the 444 skyrine gtr injectors and z32 MAF
280 is enough for now if your new to these cars,
there is the stage 1 chip gives about 220 and same as all the 'chips' no boost cut,7.5k rev limit and better fueling off boost = more mpg's
with a 28 pin eprom socket soldered into your ecu you can swap the chip at a latter date
H-dev is most used and well rated supplier of chips,there are a lot of copies and a lottery on how good they are

[IronAngel]

K th 3 end ededb f de fede

[Tanuki]

K th 3 end ededb f de fede

You read my mind!

[IronAngel]

Crap, sorry, pocket answer :-/

[ANDY black s13]

The suspense is near killing me, I'm literally dying to know what the chap wants to ask for some odd reason
Im guessing last post was auto correct is re-correcting, I really have no idea

[Jonny Wilkinson]

The suspense is near killing me, I'm literally dying to know what the chap wants to ask for some odd reason
Im guessing last post was auto correct is re-correcting, I really have no idea

The guy is saying that he had his phone in his pocket and randomly pressed buttons that resulted in shite being posted. I don't think he intended to post at all.

[ANDY black s13]

The guy is saying that he had his phone in his pocket and randomly pressed buttons that resulted in shite being posted. I don't think he intended to post at all.

Awwww but I wanted to play S body detective

[GWtaylor]

Well Andy
On the people with green user names can read it as it comes decoded once your green!

[ANDY black s13]

yes been a mere guest for too long, need to renew membership I have missed so much stuff

[Jonny Wilkinson]

yes been a mere guest for too long, need to renew membership I have missed so much stuff

Fcukin freeloader

[user23456]

How much is membership. Its about time I pulled my finger out too

[ANDY black s13]

Fcukin freeloader

Cheeky barsteward , I paid my dues for a few years,just recently every spare 20 goes on something else
and not car parts boring stuff like rent food gas n leccy
I might actually renew tomorrow, being a guest sucks so hard,like today sxoc don't remember me so I need to login now?
like the flock has finally rejected me as a ultimate hint to renew