Hi I'm sure this has been asked before but I've just got a oil catch can and having looked around there is so many bits of info but none seem to be certain to work so I need to know where to plumb into.
I know it comes off the front right hand port on the rocker cover but the other side is where I get confused as to where the other side of the can needs to go back to
Cheers
Chris
the hole in the intake pipe, between the air flow meter and the turbo.
There is a pipe coming off of the metal part of the turbo intake
You are keeping the same basic setup but instead of the air going straight into the intake, it goes into the catch can an first, then through to the intake
The next problem that you will have is where to mount the bugger! Three years later and mine is still in it's box as I could never find a place that I liked in the engine bay to mount it! Doh!
Aircon filter drier, or carbon canister positions make good mounting points
I have both still there and don't intend to remove them. Hence why my catch can has remained for years in it's box! :-(Originally Posted by inliner_04
The setup i run is:
Block manifold take off and do away with one way valve, run both rocker cover breathers into catch can, then small filter that vents next to the air filter.
Works a treat for me and my old pcv was shit so no chance of a boost leak now.
Not the best pic but shows what im on about, i have always wanted a cool looking breather setup so thats a bonus to
Posting Permissions
Reply With Quote
