-
-
Guest
There should be studs in the elbow and nuts on the side your picture shows so I presume the buts have vibrated off
-
Guest
As chap above posted, it looks like two nuts have fallen off,possibly there is only one holding it onto the elbow
post a picture of the thread of the protruding stud/bolt I can have a guess at the nut size/thread pitch you would need
most likely its a 10mm diameter stud but could be a 1.25 or 1.5 thread pitch
the picture is so blurry it looks smooth
some washers would be a good idea as well
just paused the video and I think the threads are buggered so possibly not a simple fix it may need new studs in the elbow
,the exhaust to gearbox bracket is possibly stopping it fall off
Last edited by ANDY black s13; 28-02-2015 at 23:30.
-
Guest
I'm pretty sure there m10x1.5
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules