Hi Guys,
Well it looks like there is a fair bit on for the 22nd already organised by others....
From 9:30 There is the Piston heads brekkie meet in Cross hands
Then from 13:00 onwards we will move onto the Swansea Car Fanatics meet @ UAS car care in Llanelli
https://www.facebook.com/events/1608...egular&fref=nf
Originally Posted by sideways14a
If any of you are interested then the meet point to convoy down to the Brekkie meet is Junction 47 services on the M4 (in the services not Mcdonald's)
Meet time is 09:00 to leave by 09:15.
I'll be there
it depends, if my engine start to work normal again i try to be there too. If my engine dont fix itself (yea sure :P ) im busted for like 2 months :/
ok, so my engine dont fix itself, so no chance for any meetings for me in that case :/
Don't surpose nick and Paul are attending now?
Are we going to the U A S one Nick! as we won't be functioning for the brekkie one obviously lol
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
If I can get the car MOT by Saturday will be there.
Yeah i think We may well be a little under the weather for the Brekkie meet
Im up for the UAS meet though, think the fresh air will do us good lol
Good let me know if you do go to the uas meet.
SortedYeah i think We may well be a little under the weather for the Brekkie meet
Im up for the UAS meet though, think the fresh air will do us good lol
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
Wow,good to hear its completed Gerry
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
Thanks just finished putting new steering pipes on, mot booked in for tues, just looking to find oil pressure switch
any one know where to find it!.
Last edited by Gerry; 20-02-2015 at 17:51.
Well the weather was crap and I didn't leave the house on Sunday
Well took the car for its 'mot' passed, only thing passenger side front caliper is sticking, also oil light is staying on even though
the oil seems to be circulating engine sounds sweet any thoughts, tax the car on sunday.
We were late and too hungover,so failed too
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
Not good if oil light staying on, I wouldn't run engine until it sorted, oil pressure may not be there
Ok James but what do I need to check .
I'm not sure how to go about it, need to find out how to test it, I'm sure nick
May know
Calling Nick..calling Nick
Posting Permissions
Reply With Quote
