Results 1 to 3 of 3

Thread: Wheel stud issues!

  1. #1
    Guest
    Join Date
    Aug 2014
    Location
    Scarborough
    Posts
    82
    Rides
    0

    Wheel stud issues!

    Hi I'm having a major issue I purchased sum longer wheel studs and there are to many splines and the bore is 1mm to big. I tried different stores and they all have the same studs. It's for my front end and the bore is showing 12.5 mm -12.9mm any idea where I can find the correct studs?? Thanks

  2. #2
    Guest
    Join Date
    Mar 2004
    Location
    Helston, West Cornwall
    Posts
    24,465
    Rides
    0
    It depends on what hubs you have.

    Do a search in TechS13 (assuming you have 4-stud hubs on an S13).

    IIRC, they are M12 x 1.25 pitch with a 12.7mm knurl but as I say, check the threads where its been covered before.

  3. #3
    Guest
    Join Date
    Mar 2004
    Location
    Helston, West Cornwall
    Posts
    24,465
    Rides
    0
    In fact, your memory is worse than mine as you already started a thread on this 3 months ago and got the exact info you need then from myself and Ben.

    http://www.sxoc.com/vbb/showthread.p...ighlight=knurl

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •