Widest jjj wheels without fenders s14

[loopylou]

Okay just wondering what the widest I can fit under my arch before riveting fenders on and ruining the look.




Sent from my iPhone using Tapatalk

[Mattharvey12]

I would say safely 9 front and 10 rear. It also depends on your tyres, ride height and offsets.

[WTFIA]

www.willtheyfit.com can play around with stretch and offset for days getting it how you want it, as above depends on rideheight, and how wide your suspension struts are e.g fat coilovers, thin coilovers, standard massive spring seats.

[Chriscooke]

12" et20 will go on the back with a big stretch on the tyres and a decent flare. I wouldn't want to go bigger than 10j et10 on the front.

[loopylou]

12" et20 will go on the back with a big stretch on the tyres and a decent flare. I wouldn't want to go bigger than 10j et10 on the front.

Sweet cheers. I'm looking at 11.5j et20 the car will be Lowlow with hsd monopro's and arches flared.


Sent from my iPhone using Tapatalk

[Davus200]

I run 9.5j et0 with 225/35 and 255/35 tyres with 1.5-2 degrees of camber and would say I'm near enough at the limit of pushing/ flairing the standard arches before they distort. Obviously raising the car, or more stretch/ camber you could run wider...

[Chriscooke]

11.5 and really low will be a big ask. I run an 11j et8 on the rear with a biggish flare but I'm not running that low compared to some.

[loopylou]

I'll have to get my stretch on


Sent from my iPhone using Tapatalk

[Chriscooke]

And camber

Here is how mine sit

[loopylou]

Sweet man. My arches will prob have abit more stretch too tbh. Does yours rub? Looks like it might


Sent from my iPhone using Tapatalk

[Chriscooke]

It does a little at times yes, mostly on the other side though as it's slightly lower currently as it needs setting up again.

[jordanr]

It does a little at times yes, mostly on the other side though as it's slightly lower currently as it needs setting up again.

I still can't believe how wide yours looks from behind Chris. Looks good though, I may be joining the 11s crew!

But I run 10J all round ET3 on the front with -4 camber and ET13 on the rear. I'm flared and stretched aswell.

[milsom93]

Liam Rhodes run 11J on the rear which took some fitting but he got there

[Chriscooke]

Liam had the same rims as me actually i copied him tbf.

[liamjrhodes]

As said I ran 18x11 et8 with a 245/40/18 tyre. Had to run 7degrees of camber to get the ride height I wanted through!

[ryry92]

7° /\ F that lol.

Going to run 11j on my rears - flared arches. No more than 3° neg camber (ideally) and I'd want it a few mil lower than Chris' s.

[liamjrhodes]

7° /\ F that lol.

Going to run 11j on my rears - flared arches. No more than 3° neg camber (ideally) and I'd want it a few mil lower than Chris' s.

Yeah 7 degrees was awful to drive haha no grip at all!!

[loopylou]

Yeah I want to be running less degree camber as possible. On the rear anyway lol. Sell me you rear spoiler Liam lol. Or swap boot lids I got a mint despoilered one in red


Sent from my iPhone using Tapatalk

[liamjrhodes]

Yeah I want to be running less degree camber as possible. On the rear anyway lol. Sell me you rear spoiler Liam lol. Or swap boot lids I got a mint despoilered one in red


Sent from my iPhone using Tapatalk

It's only a standard spoiler, but happy to swap for a smoothed one

[loopylou]

Ahh yeah for a second it looked like this one


Sent from my iPhone using Tapatalk