Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 52

Thread: My First S14 project

  1. #21
    Guest Zeldoz's Avatar
    Join Date
    May 2014
    Location
    Eastbourne - East Sussex
    Posts
    1,696
    Rides
    0
    Loving it! Will handle so well!

  2. #22
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    That's the idea! I haven't increased the power too much, want it handling and braking really well first. Looking at getting some dba rear discs now, new pads,and a fluid change,

  3. #23
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Oh and braided line just for the front..rears been done.

  4. #24
    Guest Zeldoz's Avatar
    Join Date
    May 2014
    Location
    Eastbourne - East Sussex
    Posts
    1,696
    Rides
    0
    I need to source new brake lines. As mine were getting pretty worn out now.

    Only the ones running to the rears.

  5. #25
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    The copper ones? Andy replaced them for me when he did the subframe as they wouldn't have passed the mot next year.

  6. #26
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0


    All painted and ready to go on.. Whitleine front arb.

  7. #27
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Updated list..

    Current mods,

    Engine: -
    Apexi air filer
    NGK colder spark plugs
    HKS bov
    Gizmo boost controller
    Japspeed front mount intercooler
    3' front pipe
    Decat
    Japspeed 3' exhaust
    Catch can and breather
    Japspeed 52mm alu radiator
    Silicon hoses and mikalor clamps
    H-Dev stage 2a chip
    Deatschwerks DW300 fuel pump
    Oil filter relolation kit and 19 row oil cooler


    Chassis: -
    Superflex poly bushed sub frame
    Hubs and back end from an R33 and handbrake.
    Hard race rear camber arms
    Hard race subframe brace
    Standard front tension arms with Superflex camber adjustable bushes.
    Superflex power steering rack bushes
    Superflex rear arm bushes
    R33 gtr rear anti roll bar with Superflex bushes and drop links.
    Super pro front anti roll bar bushes and drop links.
    Japspeed short shifter
    EPR tow straps
    BC coil overs BR series, custom setup.
    Ultra racing lower front brace
    Ultra racing 4 point lower brace.

    Exterior: -
    17' crazy purple wheels! (To be changed)
    S14A rear lights
    Clear side repeaters
    Front bumper cut to suit larger front mount.
    Rear spoiler removed by previous owner
    Ganador style wing mirrors
    Rear wiper removed
    Kouki front grill

    Interior: -
    Deep dish steering wheel
    HKB boss
    Driftworks handbrake button
    Carbon gearknob
    Defi boost gauge
    Defi oil temp gauge
    Defi water temp gauge, with GK tech water temp sensor plate.

  8. #28
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Fitted these today.. The oil cooler was a really tight fit, I had to adjust the bracket 3 times so that the front bumper fit back on.




  9. #29
    Member
    Join Date
    Mar 2009
    Location
    Llanelli, South wales
    Posts
    960
    Rides
    0
    Thinking of getting some of them braces for mine, how they sit on car? Do they sit lower than subframe

  10. #30
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    My new gauges, loving them, all wired bar the sensors, having a forged engine put in, in a few weeks, and an ACT 6 puck sprung clutch and new turbo. So wil wire the sensors when the new engine goes in.



  11. #31
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Quote Originally Posted by Gti-james View Post
    Thinking of getting some of them braces for mine, how they sit on car? Do they sit lower than subframe

    Which ones? The front ones? They do sit quite low, but I seem to miss most speed bumps

  12. #32
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Quote Originally Posted by Gti-james View Post
    Thinking of getting some of them braces for mine, how they sit on car? Do they sit lower than subframe
    The front lower ones? They do sit pretty low but I seem to miss the speed bums, I'm running 17's

  13. #33
    Flamethrower
    Join Date
    Aug 2011
    Location
    Norwich
    Posts
    2,769
    Rides
    0
    Looks like an amazing spec! keep up the hard work!

  14. #34
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Quote Originally Posted by Hosky View Post
    Looks like an amazing spec! keep up the hard work!
    Thanks bud!

  15. #35
    Flamethrower
    Join Date
    Aug 2011
    Location
    Norwich
    Posts
    2,769
    Rides
    0
    Is that a gimo boost conrtoller ontop of your steering wheel in that last pic?

  16. #36
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    New turbo going on soon... It's a got a billet comp wheel for faster spool, and a 3' anti surge comp housing too, fits in place of the standard too, I can't wait, rated to 480bhp




  17. #37
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Quote Originally Posted by Hosky View Post
    Is that a gimo boost conrtoller ontop of your steering wheel in that last pic?
    Yeh it is, I haven't finished putting the interior back together!

  18. #38
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Braided clutch line fitted, damper loop removed, weight saving.. ����




    Underbody shot of the Ultra racing braces and Whiteline arb, worth every penny!





    New forged engine fitted..




    New Kinguwa turbo installed,


  19. #39
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Just ordered a set of Nakang ns2-r for s14, ready for the track day at the end of the month. .mapping at H-dev at the end of the month too, I'm like a kid at Christmas!

  20. #40
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Double post.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •