studs and spacers

[maligantblue]

hi guys, the front wheels on my s14a rub on the brake caliper digging a wee groove into the inside of the wheel.
so two questions
how hard is it to take the studs off and fit longer ones? (as want to put a small spacer on fronts and will have very little room left on studs)
also does anyone on here sell the extended studs and 5mm hub centred spacers? as am finding it hard to find any decent ones online.

cheers byz

[jackm]

I found it easy enough to change them over. Knocked the old ones out and then used a couple of nuts, washers and a sockets to pull the new ones in.

Can't help you on who sells them I'm afraid

[maligantblue]

I found it easy enough to change them over. Knocked the old ones out and then used a couple of nuts, washers and a sockets to pull the new ones in.

Can't help you on who sells them I'm afraid

ok cheers no space to work on so have to basically direct a garage who are worried it means taking the hub off due to room behind studs for longer one to be put in..

[overnutter]

ok cheers no space to work on so have to basically direct a garage who are worried it means taking the hub off due to room behind studs for longer one to be put in..

There is space to get them in quite easily.

Driftworks sell 5mm spacers and a wide range of others.

[maligantblue]

There is space to get them in quite easily.

Driftworks sell 5mm spacers and a wide range of others.

great cheers, anyone know where i can get extended studs from? ebay is kinda hard to find right set :/

[sr_tommy]

yep conceptua tuning, look on their advert it says 'extended ones available, 65mm' or these..

http://www.ebay.co.uk/itm/Subaru-Whe...item415dc8f458

[Actual_Ben_Taylor]

H&R for spacers, comes with the longer studs