-
Guest
Face lift / pre face lift engine loom
I have a facelift 13 I'm building. I have a pre facelift I'm breaking
Can I take the ecu loom and ecu out the pre facelift and fit it to the facelift I'm building
-
Dorset & Hants Rep
So long as you use preface ecu as preface doesnt have lambda!
-
Guest
Would I need to use any other wiring from the pre facelift car other than the. Engine loom, ecu loom and ecu
-
Dorset & Hants Rep
Not that im aware that should be all you need.
-
Guest
-
Guest
You may need the afm as well as the pin out is different if your changing the loom
-
Guest
You need a matching set of...
44Fxx ECU
Prefacelift loom
4-pin AFM
or
39Fx5 ECU
Facelift loom
3-pin AFM
Lambda sensor
The facelift loom has a 3-pin plug for the AFM and wiring for the lambda sensor.
The prefacelift loom has a 4-pin plug for the AFM (additional idle adjustment connector) and no wiring for the lambda.
-
Dorset & Hants Rep
Oh yea good shout forgot about AFM!
-
Guest
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules