Wiring in horn to HKB boss & OMP wheel

[silverzx]

Ok so changed my wheel over to a OMP one earlier and was having trouble figuring out which cables are which.

The black & white are positive and negative for the air bag that need the 2.8omhs resistor between?

The yellow/blue/red are horn related but need what doing with them? My wheel has two spades on I assume to complete a circuit for the horn. Can anyone shed some light on what wires need to go where?

Here's some pictures:





This is a spare plug with the black, white, yellow, blue and red I was referring to.




Sent from my iPhone using Tapatalk

[silverzx]

45 views and not one person is able to help?

[casijapo]

look at this link
http://nissansport.es/foro/viewtopic...1634149e821625

[silverzx]

So I need the wire to go to the brass ring around my boss OR to the steering wheel horn spade?





Then what is this about?



An earth to steering wheel horn spade?

And some random cable coming from no where that goes to steering wheel horn spade?

Doesn't help I don't speak Spanish.

EDIT:

So for the horn to sound the two negatives on the steering wheel horn need to make a connection and the green/white cable should be connected to the brass ring on the boss?

REF:

http://www.sxoc.com/vbb/showthread.p...irbag-resistor
http://www.sxoc.com/vbb/showthread.p...!-Sparco-Monza

[silverzx]

BUMP!

So to confirm, the wire built into the HKB boss connects to the red wire. The other two (blue and yellow) go up to the steering wheel horn. Jobs a good un?