Copper washers for turbo lines

[T926_S14A]

Anyone know where I can get decent copper washer set for the turbo pipes? Last time I went to nissan it was £30 for the set!

Ideally after the ones that are joined so you don't struggle or drop any

[immy21]

Not joined but have the right size for oil and water lines among others.
http://www.halfords.com/motoring/gar...copper-washers

[reverie]

I bought mine from my work, their M14, so the same size as vw sump plug washers. Mine has been fine on braided hoses. Call into GSF.

Sorry, their not joined like OE. However I had no issue with them falling off and I was using shorter banjos

[Sean-B]

Or use dowty washers that are better and won't fall off as the seal grips the banjo

[richie s14a]

Get em from nissan about 3 quid each! but they are the proper joined ones.

[Chriscooke]

Or use dowty washers that are better and won't fall off as the seal grips the banjo

Those are fine for the end where they go in to the block but not sure if trust them next to the heat from the turbo

[Sean-B]

They're fine mate got them on mine. We use them where I work in much harsher environments.