-
Guest
Rear end doenst sit the same
Hey was wondering of anyone could help me I'm having troubles with working out why the back wheels sit so different from each side at the back, the right side sits further out by a lot and I've even put a 5mm spacer on the passenger side and still doesn't match, can't see anything bent at all, but one side the toe and camber arms have more thred showing. Also even put solid subframe mount bushes in as I thought it could be the bushes as they where dead and still nothing changed any ideas?
-
Guest
It's probably a silly question but the wheels aren't different widths/offsets are they?
Can you post some pictures of the arms, hubs and subframe?
-
Guest
Wheels are all 9.5j et12 was the same with the skyline wheels previous just shows up more with the wider wheels, I'll try and get some when it's not raining, and you mention hubs are there different width hubs for these? As it hadn't long had one on the passenger side as the wheel bearing had gone
-
Guest
any arms bent? Do you have adjustable arms?
-
Guest
camber difference could be other thing I suppose
-
Guest
I have seen this on quite a few 200's now, there appears to be a 10mm difference side to side, also present at the front.
Its almost like Nissan couldn't fit the bodies square to the chassis, no idea why they did it like this though.
-
Guest
It's a Nissan thing there all like it whether it's a big difference like you have or even like 2mm
Sent from my iPhone using Tapatalk
-
Guest
Well in that case I'll just double check everything and wack a bigger spacer on to make it to even it up so I have the same roll on the arches when I do them then , cheers all
-
Guest
Camber and Toe will affect how the wheels sit, so unless you've just had it aligned and know its bang on then I wouldn't worry
-
Guest
Has anyone considered trying those solid subframe bushes with offset (i think GKtech have some or are planning to make them) that move the subframe to fix this?
-
Guest
You have more negative camber on the nearside.
-
Guest
I have this problem too, right hand sits further out, but not by huge amounts.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules