Hello there!
I recently got this, a nice unfinished project, totally standard except it has a DET mounted in but hasnt been wired up or plummed in etc!
So first thing first was the wiring! Ive wired the relays in except for the fuel pump which im having trouble with, when attach the black/pink wire to the relay it doesn't work, but if I attach a ground it does come on but stays on.
The interior is pretty mint!
Just needs a clean.
Exterior is pretty scrappy though!
Missing the rear wing
And has a dented rear bumper!
So taking a break from the wiring/head scratching I took a look at the rear bumper. Dont have a manual so working out how to get it off was pretty fun!
I guess this is why its bent.
I hoping a heat gun will make it straight!
[img wi]http://4.bp.blogspot.com/-bN_Qrz-fbLQ/U52-nV36d-I/AAAAAAAACgA/CTNuwRsGyFs/s1600/IMG_0643.jpg[/img]
Should be able to straighten this bracket out.
Theres a bit of rust that needs to be sorted before the bumper goes back on!
Put on a new hopefully correct slave cylinder? was a 3/4.
Need a new Power steering pulley as this is a v belt one.
My plan is to get it running and then legal for the road, then just muck around in it for the summer, might even lower it Then I will pull the motor and sort the bay out and go through the loom properly eliminating all the spare wires as its a total mess in their right now!