Ca18det won't rev above 2.5k

[ross0787]

Hi there people iv got a s13 on a j plate, I bought it as a non runner it had a piggyback Ecu that had been removed along with the z32maf so I got a 3 pin standard maf had an auto electrician solder the wires near the Ecu and the mad plug back together and found it had 560cc injectors so replace them with standards too, I ran it up to temp as ther wasn't a radiator in but when I went to rev it ow just gets to 2.5k and hits a sort of limiter, I had read up that it could be a air/boost leak or maf so checked all the boost pipes ect all fine from what I could see so ordered another known good maf but still the problem persists any of you guru's able to point me in the right direction or anyone able to come take a gander cheers ross

[arry]

Definitely AFM fault with either the unit or wiring - the limiter is the limp home mode

[ross0787]

Found the inlet gasket leaking badly so going to change it cheers