-
Guest
-
Guest
Bump for some nice light wheels.
-
Guest
-
Guest
Bttt £250
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
Bump
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
Bttt
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
£200
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
Bump
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
-
-
Guest
I need a bigger box! Done now
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
Sfs i have found the centre caps too so add £60 more for these. All in average usable condition 2off have a few tabs broken off but stayed in the wheels ok.
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
Bttt @ £200 plus centre caps
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
-
Guest
Volk racing f-zero challenge alloys and R888 tyres.
Its about £100 to post wheels. Thay are all straight just quite a bit of powdery corrosion under the old chrome which has been painted black.
Fronts are 8J et 34/35 and rears as pictured
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
A mate has forged r32 gtr's on his s13 and with those being 8j et30 he's only got 5mm of clearance between the wheel and the front coilovers. I'm planning on running the same coilovers (KW) as they're the only decent ones with certificates that are allowed and available in Banana Belgica.
So I'm not really sure wether these will fit with decent clearance without running spacers as they're also illegal over here?? Did you run spacers and how much clearance did you have, please?
-
Guest
Im not sure if i had spacers with them. Id say no but cant be 100%. I had them on a 14a btw. Can you check with an offset calculator online?
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
Well, I've got the real thing right here (the car) with 18x8.5 et30 wheels to try on and clearance to the coilovers is nearly non-existent. So if my calculations are correct an 8j et35 will gain me 1mm which is not enough sadly. Ideally I'd like to have at least 5mm hence why I'm after an 8j et30 wheel for the front.
I suggest we put this deal on hold for the time being as I don't want to buy stuff that might or might not fit.
-
Guest
No worries.
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
-
Guest
Bttt
FS: HKS SSQV recirc inserts, S14 eccentric rear arm lockout washer kits
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules