BOLT SUPPLIER HELP!! Been a while... turning to SXOC through failed googled searches

[clive]

Basically, I need exactly these, but a UK supplier

http://www.nutsandbolts.com/m10-x-12...15-p-1729.html

M10 flange bolt, with 1.25 pitch and grade 8.8 MIN! 40mm long, shanked up to 25mm Max.

Any help would be great, cheers.

[-ghost-]

http://www.cbhfasteners.co.uk/

Pretty sure they will stock them

I go at least once a week always have anything i take in and friendly.

[clive]

http://www.cbhfasteners.co.uk/

Pretty sure they will stock them

I go at least once a week always have anything i take in and friendly.

Cheers, ill give them a bell tomorrow.

http://www.stainlessautomotivefasten...oducts_id=4071

**** paying over £4 each I need 10.

edit. as in ridditch tomorrow for work so that could be handy!

[clive]

Gone for these.

Seller don't know the grade

Suppose can only fall off the once

http://bit.ly/18B4Bfh


Sent from my iPhone using Tapatalk - now Free

[-ghost-]

I only pay 16-25pence for bolts like that

[-Marc-]

Why not just use the correct bolt and tensile with a washer?

**** using unrated bolts if it's on the car.

[clive]

I only pay 16-25pence for bolts like that

I need to sort something ASAP.

Only got this weekend to get car ready!


Sent from my iPhone using Tapatalk - now Free

[clive]

Why not just use the correct bolt and tensile with a washer?

**** using unrated bolts if it's on the car.

Space for a 19mm spanner...

I don't use the car on road.


Sent from my iPhone using Tapatalk - now Free

[-Marc-]

M10 is usually 16mm head I think.

I know it's not on the road but I wouldn't use it unless it's on something pointless.

[clive]

M10 is usually 16mm head I think.

I know it's not on the road but I wouldn't use it unless it's on something pointless.

When I tighten the bolt up FT... Ill know if its cheese.




Sent from my iPhone using Tapatalk - now Free

[-ghost-]

M10 is 17mm head m12 is normally 19mm or a least it is with the bolts I've been using lately. Clive pop in to that place tomorrow.

[chrisyboi s14]

How long you got? I will see if I can get some through work. You can owe me a few pints

[clive]

How long you got? I will see if I can get some through work. You can owe me a few pints

Ill drop you a pm with my number.

Be nice if I can have them By Friday/sat as working away so leaves just the weekend to get car ready, cheers


Sent from my iPhone using Tapatalk - now Free

[Mark]

If they dont know the grade then they will be common garden bolts and probably made from chinese steel

Not sure if we will have M10 fine here but will go raid the stores

[59bhp]

for future referance

http://www.a2stainless.co.uk/Flanged...921_B2738.aspx

to din standard

they are stainless but probably better than the ebay ones :P

edit: missed the 8.8 minimum bit

edit 2: http://www.westfieldfasteners.co.uk/...HdFlg_M10.html

there ya go

[clive]

for future referance

http://www.a2stainless.co.uk/Flanged...921_B2738.aspx

to din standard

they are stainless but probably better than the ebay ones :P

edit: missed the 8.8 minimum bit

edit 2: http://www.westfieldfasteners.co.uk/...HdFlg_M10.html

there ya go

Wrong thread pitch. Need fine


Sent from my iPhone using Tapatalk - now Free

[Si]

M10 is usually 16mm head I think.

I know it's not on the road but I wouldn't use it unless it's on something pointless.

This. Almost every non OEM bolt I've used in M10 is 16mm head.
Spa Fasteners in Leamington Spa will most likely be able to help you if you just use a bolt and washer. They'll also likely tell you that the reason that the Japanese use flange bolts is because they are too stupid to remember to put a washer on...

What is it for? Most 8.8 stuff is 8.8 for a reason... I'm guessing suspension? Bugger using ungraded slag bolts on that.

[stefspec]

Cheers, ill give them a bell tomorrow.

http://www.stainlessautomotivefasten...oducts_id=4071

**** paying over £4 each I need 10.

edit. as in ridditch tomorrow for work so that could be handy!

i bought a bunch of bolts off them when i binned off the ecentric adjuster bolts on my car.

took over 2 weeks to come and i didn't get any responses to the emails i sent chasing it up.

i ordered at a holiday time though so the place was probably closed for a while, bolts are good quality though and one of the only places i could find that does metric fine in stainless and a range of sizes.