-
Guest
350Z alloys on my S14a; will 255/35s fit?
I was wondering if anyone else was running these on standard 350Z alloys without spacers or rolled arches. I'm looking at putting them on all four wheels, but not sure if they're going to go on without rubbing.
The alloys are ET30 18x8. On willtheyfit.com it looks promising - the narrower wheels are what I have now, 225/40s, so I'd only be increasing the width by 15mm either side, and actually dropping the rolling radius a touch.
Cheers,
Will
-
Guest
I've got 245/40/18s on the back of mine and there's quite a bit of space so I think 255s should fit if they can be put on an 8j
-
I <3 BBS LM
That's a very wide tyre for an 8" rim, I'd be sticking with a 225 or 235
-
Guest
255 will fit on the rear easy with room for more! I had them on the back of my car !
-
Guest
I use them on the back for drifting with a 25mm spacer used 215s ,225s in 40 ,45 and a 55 profile basically whatever I can get my hands on and they all fit
Sent from my nokia 8510 using Tapatalk
-
Guest
245 width is the maximum suggested for an 8" rim (245/35 for an s14 to keep speedo accurate) , but I've had 255/35 on a 8" rim before, so to answer your question, yes it will.
*I should have added, I had a 255/35 up front at ET35. It fitted but it rubbed on full lock.
Last edited by Tetra; 19-07-2013 at 13:29.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules