Ok, so thought I'd start a build thread on my s14 zenki, I have owned the car for just over a month and bought the car from 's14 rob' on here. It's my first silvia and in fact my first jap car and I love it!!
The car in question is a 1994 L reg import with a little over 51000 on the clock, its had a fair bit of work done to it previously, most of which done in Japan before it was bought over a little over 5 years ago.
Here's some pics from when I first picked her up
The spec list was pretty impressive and thought it'd be a good base to go from, spec was as follows:
Spec:
Rebuilt engine
Tomei pro cams
Tomei pulley
rocker arm stoppers
nismo metal headgasket ( 1.5 ml )
nismo rod bolts
ported head
hugh l FPR
850cc injectors ( just cleaned and flow tested by APT)
balanced crank
0.2 over size pistons and locker arm WPC processing
Gt3076r mazworx turbo kit , tial 44mm waste gate tubular mani all v band.
De-jetro power fc fitted and mapped at APT
r34 gtr sized intercooler
trust oil cooler
larger water pump pulley
Samco hoses
pulsar throttle body
pure surge tank
nismo fuel pump
nismo engine mounts
uras gearbox mounts
cusco f&r tower bars
full roll cage
os giken super skill twin plate clutch ( new plates last year )
tein tie rods
cusco 1.5 way diff
kei office type xr coilovers
massive anti roll bars
nismo brace bar lower arms
piro tension rod
piro traction rod
piro toe control arm
piro upper arm
skyline caliperas f&r
17" avs alloys 9j front 10j rear ( just refurbed )
Brand new toyo R888's
RB 25 gearbox conversion last year
Greddy gauges
Blitz turbo timer
Greddy boost controller
Mapped by Gary at apt making 420bhp @1.3 bar
The plan is to learn to drive it properly, and I mean properly it'll see drift days, track days and will be used on the road.
Since ownership I have changed a few things, first few bits to change were the seats, or seat for now as I had to order a new passenger rail for side mounting, I had some cobra evolutions from a track car I was building but saw sense and broke it up for bits so have a few tasty bits left over for this including a stack dash which will soon find its way in the 14
So got the drivers seat and my harness in
And changed the rear lights to 14a items
I have also changed the snap off steering wheel boss for a lifeline item, again from the old project I had.
Have been a busy boy over the last week or so with the car and will update tomoz when's its all back together
Mitch