Results 1 to 7 of 7

Thread: Stage 3

  1. #1
    Guest
    Join Date
    May 2010
    Location
    Gloucester
    Posts
    356
    Rides
    0

    Stage 3

    Hey all,

    This has probably been covered before, but I can't find it in the search (I maybe being blind).

    Who's running stage 3 on a ca??
    And what mods (apart from standard stage 3) do you have??
    So looking at clutch etc.

    Cheers

  2. #2
    Guest
    Join Date
    May 2010
    Location
    Gloucester
    Posts
    356
    Rides
    0
    Nobody running a ca on stage 3??

  3. #3
    Guest
    Join Date
    Mar 2004
    Location
    Helston, West Cornwall
    Posts
    24,397
    Rides
    0
    They probably don't understand the question. I don't

  4. #4
    Guest
    Join Date
    Sep 2005
    Location
    Swansea, South Wales
    Posts
    3,286
    Rides
    0
    Maybe the op is looking for a clutch that will take st3 powers, if that is what you are looking for check out the linky:

    http://www.sxoc.com/vbb/showthread.p...remaining-kits!

    I got a st4 comp clutch on the above thread, more than I will probably need but better to over spec than under. Hope this helps.
    Last edited by foghorn leghorn; 24-06-2013 at 13:20.

  5. #5
    Guest
    Join Date
    May 2010
    Location
    Gloucester
    Posts
    356
    Rides
    0
    Quote Originally Posted by foghorn leghorn View Post
    Maybe the op is looking for a clutch that will take st3 powers, if that is what you are looking for check out the linky:

    http://www.sxoc.com/vbb/showthread.p...remaining-kits!

    I got a st4 comp clutch on the above thread, more than I will probably need but better to over spec than under. Hope this helps.
    Yea, that was the kinda thing I'm looking for. I know the mods needed to go stage three so chip 444s etc was just curious as to what people were running with it, clutch/diff/driveshaft?? The things that aren't necessary to go stage 3.

    Make more sense??

  6. #6
    TMNT Kieran_E1's Avatar
    Join Date
    Jul 2004
    Location
    Glasgow
    Posts
    15,332
    Rides
    0
    for no real reason a lot of people seem to struggle getting a stage 3 setup to work on the ca. i know a few folk who ended up going back to stage 2.

    not that was a while ago so i dunno if anything has changed.

    as for clutch

    exedy hyper single is a good call. Kev has been running his for about 4 or 5 drift seasons at 360+bhp on a stroked ca and it's still going strong

  7. #7
    Guest
    Join Date
    Oct 2012
    Location
    N.Ireland
    Posts
    14
    Rides
    0
    Hi mate.

    I'm running a stage 3. Good upgrade if done right.

    Acl main and big end bearings
    Gapless rings
    Gt28 turbo rebuilt with 360 bearing and tapered seals
    Cosmetic gaskets and mls headgasket
    Stainless 316 manifold and straight through stainless system.
    Z32 maf
    Horsham dev stage 3 chip
    Manual boost controller
    Front mount intercooler
    Big 444 injectors
    Walbro fuel pump
    Solid engine and box mounts
    Braided water oil clutch and brake lines
    Hks filter
    Blitz blow off valve
    Exedy clutch with short shifter
    Blitz turbo timer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •