Chevy Stuff:

350 4bolt (stronger) mains block
MSD 6AL ignition unit
MSD Pro billet Dizzy unit, with leadsBox of
3 Holley 4barrel carbs (around 650cfm) one for spares, one vac and one mech secondaries,
Also have chome double feed pipe.
Holley spares and hop ups (all in organiser box)
Holley contender inlet manifold (and carb spacer)
Holley blue fuel pump
Standard crank, needs grinding, surface rust
Rods are there and are ok but again, some surface rust
4 standard cast heads with rockers and valves (again standard)
Sump with mild mod/extension?
light flywheel and unknown clutch
Alternator
Mild steel tubular headers, need some attention
Fuel pressure regulator
Box of various parts including gaskets, coils, cam cover retainers, clamps, standard dizzy etc

















Been collecting over the years, but real life has got in the way so regrettably going to have to sell, owes me several thousand and will not split tbh, good stuff though and look how cheap chevy stuff is on reel steal, set of forgys for 8 are less than 4 for an SR And is same weight, but sits further back than a 1JZ, plus no silly ecu and looms! Simple Grunts FTW... :smokin:

£1650 takes it all if it goes quick. Cambridge area.