dc2 recaros into s14a?

[Nathsx]

hi has anyone fitted dc2 recaros into an s14a,

ive heard that bride super low rails fit, and if so has anyone done this furthermore how high do they sit ??

any advice etc would be great

[AndyS13]

they bolt into the floor afaik

[Jonny Mac]

if i can get time tomorrow as i need to go on my pc and look up old pics of my last 14 i'll give you the code of the bride rail you need to look for that bolts direct to a recaro and into a 14

bride make a load of different basemount low rails and one of say 10 rails actually fit exactly the same pattern at the 6 bolts on the bottom of the recaro

rails usually go for anything between 90-110 delivered on driftworks so keep your eyes on the parts for sale section on the dw forum.

[a13x.]

you need BRIDE MO type seat rails. they fit s13/s14. best seats you can get imo.

you'll sit 1-2cm lower than OEM.

[JC SX]

you need BRIDE MO type seat rails. they fit s13/s14. best seats you can get imo.

you'll sit 1-2cm lower than OEM.

That is nice if your Recaro seat bottoms are perfectly flat like that
My seats I have here will not go on the bride rails I have as there is a hump under each seat sticking down below the rails 4cm- 6cm

[immy21]

That is nice if your Recaro seat bottoms are perfectly flat like that
My seats I have here will not go on the bride rails I have as there is a hump under each seat sticking down below the rails 4cm- 6cm

Do you have MO rails?
If you do do want to sell them?
Or even swap them for my genuine Recaro to sbody rails?

My Recaro rails sit about 1ish cm/ tiny touch higher than stock, I still managed to use a helmet but I wanna go lower!

[JC SX]

I think mine are mo, they're pretty low, got pics of the genuine Recaro rails, ill get a pic of the setup I have in my spare room

[immy21]

Yeah, il put the pics on here so others can see to

[immy21]

Couldn't find any pics of them bolted to the base directly but they do not have a bar running between them so there should be plenty of space for the hump between the floor and seat base, my seats have no issue's anyway.

[JC SX]

I can't tell if there MO type or not, I bought the passenger one from Frsport and the drivers from a forum member on here

All I know is its not as bolt on as I'd like and the seats having a hump seem to make them an impossible fit

[MEL]

Not in a 14 but

Better late than never









Just flat bar welded to the runners which are still working

From my project thread

[JC SX]

I've got no problem having a plate welded onto the bride frame, as you can see the Recaros I have are bottom mount but have a hump section that protrudes between the rails
I think I may sell on my seats and try to find some nice flat bottomed ones like your red ones