-
Guest
Stage 2 chip... help?
Hello,
Can anyone in or near Bury/Manchester help me out with fitting a chip, and the associated adjustment to the timing?
Beers offered obv for your troubles
-
Guest
If its for a 13, buy a socketted ECU (with the same numbers as your current one) or buy a socket from Maplins for about 99p and take it to a TV repair place. They'll remove the current chip and install the socket for a few quid.
All you then need to do is to push in the chip. As long as you fit it the right way round
Timing shouldn't need adjusting I wouldn't have thought. 15 deg +- 2 deg is standard.
Then all you've got to do is fit a T28 to go with the chip and some kind of boost controller.
-
Guest
The boost controller and T28 are fitted its just the chip! On the instructions with the chip it says I need to advance the timing by 14 degrees? Is this not the case?
-
-
Guest
Cheers for the help thats great, it is a h-dev chip I dont trust ebay chips haha!
I'll get it installed and then on an RR and check that its not over fueling or under fueling but that might be a few weeks away yet, I still need to set the boost controller up etc before its going to be running right.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules