Page 5 of 13 FirstFirst ... 34567 ... LastLast
Results 81 to 100 of 245

Thread: Jebsport Battleship Grey GTX 28 powered S14A ( The Re-birth)

  1. #81
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Yeah ive seen that afew times.

    Ive got the kouki front and rear and Greddy splitter, Got genuine Navan skirts.

    Just need decent spats and im struggling to find the rear spoiler at the moment :-(

    I need someone to paint it all too !

    Yeah i was going to go with GTR-D's but ive seen afew now and unsure !

    The car is away at Tunning Developmets , its having a check over and its going on the rolling road etc to see if i still have 380 bhp at 1.2 bar ;-)

    the turbo will do 2.2 bar all day :-)

  2. #82
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    The car is back and running ! Needs a new knock sensor as this must have got damaged in crash or between removing and re-installation !

    Has had a Full check over by Tuning developments and afew bits and bob sorted.

    Dave is going to do the Z32 rear conversion and we will get the bumpers on and get it motd .

    Bodywork and roll cage can then be sorted out :-)

  3. #83
    Guest M.D.'s Avatar
    Join Date
    Jul 2005
    Location
    plymouth
    Posts
    10,631
    Rides
    0
    That's brilliant news .

  4. #84
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Still alot of work to do on the car to get it how i want it but considering we have had to strip my old car for every part and then fully build up another from a shell up with mainly just working on the weekends we havent done to bad but mainly dave !

    Just awaiting a knock sensor then finish the Z32's and finish the headlights and should be ok to get MOTD.

    Need to find a decent painter to do some work

  5. #85
    Guest M.D.'s Avatar
    Join Date
    Jul 2005
    Location
    plymouth
    Posts
    10,631
    Rides
    0
    unplug the knock sensor till you get a new one, itll make it run properly at least for now

  6. #86
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Ahh cool , ive ordered one so hopefully be here in afew days but its on ramps at the moment while we finish the rear brakes off.

    It seemed to drive ok apart from abit low down it felt like it was missing but mike reckons it will be down on power until it gets sorted.

    seems to bloody shift either way !

  7. #87
    Guest
    Join Date
    Mar 2010
    Location
    wrexham, n wales
    Posts
    28
    Rides
    0
    Oh she's lively! Leaving 11's in 2nd in the dry whilst its down on power! Can't wait for this thing to be on the road and it's not even my car!!

    Still think we should swap cars dk

  8. #88
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Nope :-)

  9. #89
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    HID's wired in and working.

    New stalks fitted also as one was damaged from my green 200.

    Dave has got the Z32 rear brake conversion on and handbrake fitted, need new bolts to fit into Z32 calipers so went to get these from demon tweeks.

    Just need some rear braided lines from dan at DB power then should be able to get MOT.

    Nedd to fit a new knock sensor too

  10. #90
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Back down tonight to fit rear bumper , fit rear braided lines and fit new knock sensor.

    Then hopefully take for mot on Saturday :-)

  11. #91
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Rear Bumper Fitted.

    Braided lines fitted, we had abit of a mare , one of the copper lines was leaking so dave had to get the flaring tool out and re do it , he's a star !

    We also managed to fir the new knock sensor and it was done in 20 mins :-)

    We made one little mistake and used the hubs which came with the Z32 conversion and found out these must not be quite rite as the nut on the shaft come loose so we need to put the S14A rear hubs back on sat then take for an mot.

    Making good progress though.

    The GTX turbo starts boosting literally straight away !

  12. #92
    Guest zeppelin101's Avatar
    Join Date
    Sep 2008
    Location
    Leicester
    Posts
    9,760
    Rides
    0
    What version GTX28 have you gone for? 2867 I assume.

  13. #93
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Yes thats the one buddy .

    Think theres only 2 of us in the UK running these on 200's.

    Its alot of money just for the insert as you have to already have the exhaust housing for the turbo

  14. #94
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    380 bhp at 1.2 bar isnt bad though :-)

  15. #95
    Guest zeppelin101's Avatar
    Join Date
    Sep 2008
    Location
    Leicester
    Posts
    9,760
    Rides
    0
    Quote Originally Posted by finch View Post
    Yes thats the one buddy .

    Think theres only 2 of us in the UK running these on 200's.

    Its alot of money just for the insert as you have to already have the exhaust housing for the turbo
    Interesting. I was investigating 2860/63s and seeing if it's possible to get a twin scroll exhaust housing. Apparently Garrett made an announcement a few months ago saying they had developed some twin scroll turbine housings but I haven't seen them available anywhere.

    The transient response should be phenomenal if a good twin scroll housing is available at any point though.

  16. #96
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Put it this way theres no turbo lag on this turbo , its silly how quickly it starts spooling up !

    Thats what caught me out on my first drive !

    Eventually i am going to go top mount set up with a GTX30 and a full forge set up and uprated gearbox.

  17. #97
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0

  18. #98
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    The car now has am MOT , tax at the end of the month , then it can go for alignment at Demon tweeks .

    Had a strange starting issue yesterday but has seemed to sort itself out

  19. #99
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,381
    Rides
    1
    Happy days bet you can't wait
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  20. #100
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,914
    Rides
    0
    Still alot of work to do chris but atleast i will be able to drive it to places to get jobs done.

    Still need to source some interior and get into a bodyshop when i can afford it !

    Hows yours coming along , have you got your bumper painted yet ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •