upgrading turbo on glanza. question about injectors?

[james13]

hi asking this on behalf of a freind who is fitting a td04 turbo on his glanza. does anyone know what size standard s13 injectors are? is it 370cc? and does anyone know if they will fit on a toyota starlet glanza? thanks

[sparky_s13]

I had a Starlet with a TD04 and tbh you wont need to upgrade injectors or pump unless your running mental boost above 1.5bar which I wouldnt recommend on a stock engine.

I was running 1.2 bar with stock FPR, injectors but with an uprated pump as I had one lying around.

[sparky_s13]

Also CA18DET injectors are 370cc and low impedance. Starlets are high impedance so will require resistors.

Supra and RX7 are common upgrade injectors for them

[james13]

Cool thanks mate that's some good info

[Mike s14a]

I would upgrade them anyway as running them at full tilt will only cause them to fail sooner, just make sure there's a fuel cut defender an upgraded fuel pump and fpr fuel cut in those is like getting hit in the back of the head with a brick lol

[M.D.]

I've seen several with scoob turbos on now. They make silly power too with very little mods.

[james13]

thanks for the comments guys i expect it will be stupidly quick when its done will try an get some pics or a vid

[Rubix_Cube]

I'm sure OEM is only about 270cc. I bought these for mine way back in 2005 and never did:

Was told they were a direct fitment upgrade:

http://www.ebay.co.uk/itm/DENSO-1955...item35c347f15b

TD04 ones make about 220hp-250hp. I wouldn't push it too hard unless it has a forged engine. Stock doesn't like going much over 240-250bhp.

Guy who runs the UK Starlet Owners forum, Socks, has 385hp out of his....with it still being a 1.3

[Steve_20085]

Pm a guy on here called McLean, he lives round the corner from me and had an awesome little glanza that was fully forged.