So decided to make the most of a nice day today and thought id fit catch tank and re-route the breathers. Whilst i was there i thought id be daring and check / replace the 'block to head' breather pipe under the inlet manifold.
I removed the plenum and replaced the horible metal 90 degree pipe for a nice new hose, checking i hadnt kinked it or squashed it. Once that was back together (horrible job by the way) i went about fitting my catch tank, new breather pipes and blocking off the back of the plenum and the intake trunk.
As soon as i started it to check i had done it right, i found out i hadnt done it right at all. Im now getting very very lumpy idle and stalling, and lots of blue smoke coming from both the exhaust and the catch tank filter. Pick of the catch tank/breather setup below so hopefully someone can pick out what ive done wrong
[IMG][/IMG]
What have i done wrong?? Any ideas guys, this is my daily driver and cant have it off the road