Results 1 to 3 of 3

Thread: Clunk in first gear and reversing.

  1. #1
    Guest
    Join Date
    Apr 2007
    Location
    ee
    Posts
    51
    Rides
    0

    Clunk in first gear and reversing.

    Hi all, i need to know is this is normal or have a problem. So refurbed my rear end, put coilovers, all poly subframe and knuckles bushes and diff solid bushes. Now when going from first gear to second, when i clutch, theres clunk and when reversing , then its single clunk again. It seems like a little play in prop/diff, or does solid buses transmit more noise to cabin?
    Anyone with solid bushes have same?

  2. #2
    Guest DeanS15's Avatar
    Join Date
    May 2008
    Location
    Eastchurch, Kent
    Posts
    3,710
    Rides
    0
    It's diff knock mate, just when the gears contact each other, when you've been going forward then start to reverse there is a little bit of play to be taken up, that's when it knocks, and vice versa. It also sometimes happens when you come off throttle an go back on. It's probably always done it, but now there's nothing to absorb it

  3. #3
    Guest
    Join Date
    Apr 2007
    Location
    ee
    Posts
    51
    Rides
    0
    Ok, thanks Dean, i was thinking, that its been always there, now i just got to get used to it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •