external wastegate help needed please !!!!!!!!

[s14rob]

How can i get a nipple for a vac hose in my hot pipe ? its an alloy pipe ?

[Drifter]

When you said port, did you mean ports? If it's like my MVS WG it'll have about 3 unused ports
My old TD06 setup used to have a supply from the cold side with no problems so I can't see that being an issue tbh.

[s14rob]

Ill check for more ports when i go back to the garage in a bit , i'll feel a right tit if ive missed one lol , if i did miss one would the wastegate not open ?

[Drifter]

How can i get a nipple for a vac hose in my hot pipe ? its an alloy pipe ?

I used a nipple that you screw into a silicone pipe. Gary might have one, I'll ask him in a minute. Can't see it being the problem thoughtbh.

[Actual_Ben_Taylor]

There should be 3 bottom ports (2 blocked, 1 in use) and 2 top ports (1 blocked, 1 in use). Check that first.

Then put the boost feed directly to the bottom port on the wastegate and remove everything else. See if that works.

[Actual_Ben_Taylor]

Ill check for more ports when i go back to the garage in a bit , i'll feel a right tit if ive missed one lol , if i did miss one would the wastegate not open ?

If you missed a bottom one it would never open.

[s14rob]

Cheers for your help guys !!

[s14rob]

I missed 2 of the bottom ports on the wastegate lol !!! Cheers Ben

[s14rob]

Just took it down the road and at 0.8 bar it's mental !!! Looking forward to tomorrow now !!

[Drifter]

I missed 2 of the bottom ports on the wastegate lol !!! Cheers Ben

Plank

[s14rob]

I no lol couldn't believe it !! And I pissed around taking the wastegate off for nothing lol

[Gary@APT]

DIY,destroy it yourself!!! lmao

[Actual_Ben_Taylor]

DIY,destroy it yourself!!! lmao

Gotta love those unlimited boost situations

[s14rob]

Lol it was interesting !!