Anyone know where I can get one of these?
I've managed to loose one
Cheers
Topp
Pic for reference......
Anyone know where I can get one of these?
I've managed to loose one
Cheers
Topp
Pic for reference......
Someone might have a spare, otherwise it's Nissan I reckon
If you've only lost one then take the one thats hidden in the middle of the cover to replace (im guessing here) the one on the outside that you've lost and just put a normal washer in the middle, that way your outside ones will still all be the same.
Lots of Nissans in breakers yard.
I have already used the inside one on the outer edge, does it matter that i just use a normal washer? I.e. doesnt need the rubber element to help fill the hole?
It's either
To seal the hole against oil leakage. You may get a small weep if this the reason.
OR
It's to isolate the cam cover so it doesn't reverberate and amplify engine noise. Vehicle noise limits have demanded they do everything they can to reduce noise. The way it uses a shouldered bolt suggests that this the reason. The cam cover is isolated from direct engine vibration by the rubber seal and the rubber washer.
Thanks
Can anyone give me the part number? I'll give Nissan a call.... hisss boooo
Bolt with washer 11/1995 onwards (UK delivery/reg about 3/1996) the washer is 13268-31U01.
Fitted on
Maxima 2L VQ20DE 94-
Maxima 3L VQ30DE 94-
Serena C23M SR20DE Manual 96-
Almera N15 SR20DE 96-
Primera P10E SR20DE 93-96
Primera P10E SR20DI (single point injection) 93-96
Primera P11E SR20DE 96-97
Primera P11E SR20DEL (???) 96-
Primera Wagon WP11E SR20DE 98-
Early cars 94-95 had studs with nut and washer for that is 13268-97E00.
100NX 2L B13 SR20DE
Pulsar GTi N14 SR20DET
Primera P10E SR20DE 93-
Serena C23M SR20DE Manual 93-96
Primera Wagon W10 SR20DI 92-94 SR20DE 94-96