Page 1 of 10 123 ... LastLast
Results 1 to 20 of 188

Thread: Danny's sx

  1. #1
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0

    Danny's sx

    well i have been on here for just over a year now and thought i'd finally do a project thread.

    well a brief history of the car, brought her in august 2010 was driving happily for aroound 4 months then bottom end went

    brought a replacement engine and jay20 and his bro s13ryan came to my house and replaced the engine free of charge.



















































    well that was the engine change and after that i was happy again, well finally got her started and went to a local meet and on the way home lost everything, and pulled into the hard shoulder, and tried to start the engine again and nothing, finally the AA came and took me home.

    they confirmed that the bottom end had gone again and after only 30 miles. i was not amused.

    i was rather annoyed so i decided to sell it to jay20 who managed to do this to it..






  2. #2
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0

























































  3. #3
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0




















































    thats how i got it back off jay20 (obviously after some tokens were exchanged)

    and this is what i have done so far..




  4. #4
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0




























    well thats all for now i have some spacers ready to go on and have just brought some 30mm overfenders to go on so i'll update when they go on

    sorry about the mass amount of pics and hope you like..

  5. #5
    Guest Gazwould's Avatar
    Join Date
    Jun 2009
    Location
    Somerset
    Posts
    1,232
    Rides
    0
    Thats pic heavy, what was the causes of the bottom end fails ?

    S reg Zenki

  6. #6
    Guest itrhondaboy's Avatar
    Join Date
    Jul 2007
    Location
    Northwich
    Posts
    5,096
    Rides
    0
    Like the matte black look

  7. #7
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    Quote Originally Posted by Gazwould View Post
    Thats pic heavy, what was the causes of the bottom end fails ?

    S reg Zenki
    im not sure buddy and the engine i brought i think they mugged me off

    and yea i was a bit unsure of this but the import papers are all correct

  8. #8
    Guest clive's Avatar
    Join Date
    Jul 2009
    Location
    chichester, west sussex nr portsmouth
    Posts
    11,439
    Rides
    0
    tell by this pic:

    http://i209.photobucket.com/albums/b...10103-1355.jpg

    its always been a zenki, no cut outs behind the lights in the slam panel

    Jay and Ryan= Legends

  9. #9
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    a little update for today, recieved my rear over fenders the other day they look awesome, no pics as yet but will take some tomorrow trial fitting them and then its the weekend that there be getting fitted

  10. #10
    Guest jay20's Avatar
    Join Date
    Aug 2006
    Location
    camberley
    Posts
    2,080
    Rides
    0
    cheers clive

    holy crap i forgot how much work i did lol liking the new look danny

  11. #11
    Guest MC_Bob's Avatar
    Join Date
    Oct 2010
    Location
    Barkway, Royston.
    Posts
    1,340
    Rides
    0
    Yeah those guys sold me an engine which has been flawless for me.

    Nice build.

  12. #12
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    yea, you managed to do a lot lol





    my overfenders trial fitted, just waiting until saturday then im popping up to see jay to get them properly fitted

  13. #13
    Guest joey200sx's Avatar
    Join Date
    Jul 2005
    Location
    aberdeen
    Posts
    4,574
    Rides
    0
    Looks like alot of hard work mate! Good job

  14. #14
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    Quote Originally Posted by Joey200sx View Post
    Looks like alot of hard work mate! Good job
    i cant take all the glory from the effort put into this car jay20 and his bro (s13ryan) did so much to this first

  15. #15
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    a little update for today, went to jay's lock-up and we (mainly jay) got to work on my fitting my over fenders, while we were at it we managed to sort out my side skirts and rear bumper and i fitted my decat aswell.

    heres some pics from today..















































    thats all for today and although it was bloody cold a good days works

  16. #16
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    another little update, managed to clean the inside of the car and fit spacers and paint my overfenders just need to wash it and make sure i havent missed anything as it got dark but heres some pics and a little write up i stole of jay because i forgot to write anything

    cut the top skin and cut original folding egde off then bent the inner skin up cutting a few slits into so it bends easyer.weld the inner skin to the new height of the outter then cut off the extra hang over. grind the welds down if needed then slap some hammerite on to seal it.drill the holes in the over fenders, trial fit with tape once right hold and drill throughn the body.once all hols are drilled take the fender off and put a bead of mastic around the hole fender so you dont get water between them both.then pop rivit on.



















    sorry with the crappy pics i'll take some after i washed it so it looks all nice

    thanks for looking

  17. #17
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    after finishing painting my rear fenders two days ago i thought i'd measure to see how much clearance i have between the wheel and arch....

    look --------------------->




    think i can push 40mm spacers....

    opinions??

  18. #18
    Guest turbodonkey's Avatar
    Join Date
    Oct 2010
    Location
    Gloucester
    Posts
    301
    Rides
    0
    that car is lookin pretty damn sweet. wish i had a few people to help me with mine, good work from all of you guys though... keep it up

  19. #19
    Guest clive's Avatar
    Join Date
    Jul 2009
    Location
    chichester, west sussex nr portsmouth
    Posts
    11,439
    Rides
    0
    yeap. needs 40mm spacers like I said

  20. #20
    Guest dannyboi200sx's Avatar
    Join Date
    Dec 2010
    Location
    southampton
    Posts
    2,004
    Rides
    0
    Well u did miss my bday haha

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •