Treated myself to an Arcan 3 tonne Jack. Seems very well made, sturdy and damn heavy. Nice wide foot print too. The paint on the wheels lasted 5 secs but doesn’t matter.
Also bought some new hubcentric 5mm spacers for all 4 wheels
New vs old
Treated myself to an Arcan 3 tonne Jack. Seems very well made, sturdy and damn heavy. Nice wide foot print too. The paint on the wheels lasted 5 secs but doesn’t matter.
Also bought some new hubcentric 5mm spacers for all 4 wheels
New vs old
I’ve got the alloy 2 ton version of that jack. It’s really good and taken loads of abuse, starting to show its age a little now though.
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Good hear yours is still going strong mate. I read a bunch of reviews but didn’t find anything negative about them so fingers crossed it’ll last me a while!
Had an issue with the old LED’s, so I put in some new LED’s and refitted the louvres today
Last edited by sx rider; 23-08-2020 at 16:15.
Got my loom relocated today, new hole instead of slotting and pulling it up. Should be all safe and sound now!
Looks perfect to me at that height/alignment setup. Top job
Thanks mate
I ordered a set of seats, plus the rails from Japan. Just got to wait for them to arrive now
Also adjusted the ride height a bit, 5mm in the front and 10mm lower in the rear.
Another appointment with the arch roller today, rears needed a little bit more room, 5mm on the drivers side and 3mm on the passenger side was enough to stop the rubbing
Jamie @evilsil80 is making me some sidelights
Excited to get these fitted now
Pretty happy right now...