how much for these?

**t51rjohn** · 12-07-2010, 16:51

Hi how much for the water jacket blanking plate and water pump blanking plate??

Thanks

John

**MazworxRacing** · 12-07-2010, 18:44

Hi,
It will be 120.00USD shipped for both pcs.

Thanks

**t51rjohn** · 12-07-2010, 18:50

could you have a look on the thread below and advise on my plan for my coolant system please?

http://www.sxoc.com/vbb/showthread.php?t=442532&page=11

Thanks John

**MazworxRacing** · 13-07-2010, 21:43

Originally Posted by t51rjohn

could you have a look on the thread below and advise on my plan for my coolant system please?

http://www.sxoc.com/vbb/showthread.php?t=442532&page=11

Thanks John

Ive looked at it but not quite sure what you are trying to do.

**t51rjohn** · 17-07-2010, 15:23

i want to run an electric water pump, i have tried to see pictures of your system on the s15 drag car as i beleive it will be similar.

Do you have any pictures of it.

My idea is the front plate that covers the water pump to have a AN-12 fitting welded on to feed the water pump.

Then on the other side of the engine would be another AN-12 welded on fitting to which it will come from the radiator.

I plan on getting my radiator modified to have AN-12 fittings welded on so i can use Earls Proflex hose and have a sealed syetem.

Would really help if i could see more pics of your water system to be fair.

Thanks

John

**t51rjohn** · 17-07-2010, 15:52

Can you get the adapter going into the head also for the water cooler pipes, i think i need AN-12 adapter on there and an adapter for the original turbo coolant hose (mine is braided so exact location is not that important, it would reach by the head).

Thanks John

**MazworxRacing** · 19-07-2010, 14:08

Actually most of the fittings for water is -16an not -12an

**t51rjohn** · 19-07-2010, 16:39

what water pump do you guys use?

**MazworxRacing** · 19-07-2010, 16:54

We run a custom electric pump in the race car, but most people run the Meziere

**t51rjohn** · 19-07-2010, 17:20

ok i think i have found the pump (Meziere Enterprises WP116U) i need, i can get 1" to AN 16 fittings then use that.

Can you do the blanking plates for the block on inlet side with the AN-16 fittings welded on for the water pump inlet?

Also can you do a plate for the turbo side which will have an AN-16 fitting welded on and a fitting for the std turbo feed?

Thanks

John

**MazworxRacing** · 19-07-2010, 19:07

Which plates are you looking for exactly?

**t51rjohn** · 19-07-2010, 20:10

the 2 in the first pictures and the coolant outlet/inlet on the exhaust side of the head.

Hope this helps

Thanks John

**MazworxRacing** · 19-07-2010, 20:19

I have the top 2 instock which I can weld a -16an fitting on one of them for you for a lil extra charge. The front "water neck", we have plans of making a full one out of billet aluminum but dont know exactly when.

**t51rjohn** · 19-07-2010, 20:57

The front water neck can you knock up a plate with a weld on AN-16 fitting or is that something i am better trying to get done here?

How much would it be to have the top 2 plates delivered with the fitting welded on? I think it would be better on the smaller plate or do you think it is best where the old water pump would sit?

Thanks John

**MazworxRacing** · 20-07-2010, 15:39

I can do the 2 in the rear with a -16an welded for 151.95USD shipped to you. As far as the front one is concerned, we will develop it soon but I cannot build a blanking plate with a bung welded on it at the moment.

**t51rjohn** · 20-07-2010, 16:54

would the price for them plus 2 rail adapters i have asked for a price for be the same shipping costs?

Thanks John

**MazworxRacing** · 20-07-2010, 18:29

It will be additional 160.00 no extra shipping costs

Thanks

Thread: how much for these?

Thread Tools

how much for these?

Posting Permissions