hi polo
is there any chance you have a gearlinkage for a z32 gearbox? i think this is what its called lol it has the small UV joint and the shaft that goes into the box.
let me know if you can get one cheers
hi polo
is there any chance you have a gearlinkage for a z32 gearbox? i think this is what its called lol it has the small UV joint and the shaft that goes into the box.
let me know if you can get one cheers
hello fella im glad to see the plan for portugal is going well but im wondering what you would charge to swap an rb20e cef from auto to manual pm me if it makes life easier
I have all the bits in stock now to do a full conversion.
Parts include,
RB25 box,
Adaptor plate,
Rb25 cross member (no need for custom one)
Modified rb25 prop,
RB25 slave cylinder and a shifter, there are a few options with the shifter.
Hole lot fitted including parts and new gear oil is £1100
Sorry mate i dont have one.
Your looking at around £300 labour + parts, i do not have any parts for the job but there the same as s13, youl just need either and s13 box and rb bellhousing or an rb box, (the boxs are the same inside)
Paul
Cheers mate - I will deffo be in touch although this will have to be after Christmas. I know it sounds lame but I'd rather be honest about when I'll have the cash ready Cheers
ok polo so in total ill need a clutch pedal from an r32 is that correct an rb20 r32 gearbox as i believe there a cable driven speedo aswell a clutch/flywheel and slave cylinder etc
is there any wiring i need to find
and would it be easier to just swap the whole lot out for an sr or different rb
ahh happy days i have about 4 ca18 boxes kicking about here but will try start looking for the other parts
PM sent for a quote.
Hello mate,how much would you charge to fit a turbo elbow on my s15 I have all the necessary bolts and gaskets.
One of the bolts on the heat shield is pretty mashed too ,I have caned it with wd40 to hopefully free it up a bit,but all the bolts look pretty rusted tbh
Last edited by pegliobagli; 17-10-2010 at 19:35.
Ah top man,when do you think you would be able to fit me in?I will whack some more wd on it hopefully that will help !
TBH, i wouldnt worry about WD, it wont be going back in once the elbow is on so i can just take the head off of the bolt to get the heat sheild off
I think the soonest i can get you in ATM is a week tomorow, but may be able to squeeze you in some time this week if your in a rush
Not in much of a rush mate just getting the car sorted for mot first week of november! I am free in the morning every day anyways mate as I don't start work till 330 so should be plenty of time to sort it?
Hello Polo, how much to do the turbo to mani gasket?
£170? is it worth getting new braided turbo Water and oil lines like i've been reading in some threads? apart from that everything provided by you.