Please ask here for prices, if i can do, how long itl take, when etc etc etc
Please ask here for prices, if i can do, how long itl take, when etc etc etc
Where abouts you based mate? I cant find it anywhere and think it might be useful to know
The location is in the "About" thread but for any one who did not see it, the workshop is located between Aylesbury and Bicester on the A41 in Buckinghamshire.
You know dw has the geomaster hubs, can you make a set using s14 hubs that can not only incorporate a lot more lock but also help reset the roll centre?
Also if this was possible for you, how much would we be looking at roughly
cheers dude.
Hello mate
How much to fit elbow, tube mani and downpipe?
Hi Richy,
Yes i can make roll centre correction hubs, but only for the front and they are not sold for road use
Extra lock and reduced Ackerman hubs are £150 on exchange,
Roll centre correction aswell as extra lock and reduced Ackerman are £300 on exchange.
Hi Marcus,
To fit that lot, previding you have all the gaskets, its £120 including new antifreeze
Hello mate, I will have all the gaskets but.........they are the ones off the car that the elbow, mani etc are coming off. The guys assured me that that they are not split and are fine. I would have got new ones but got a quote from apex at 110 quid
You changed my head to mani gasket, mani to turbo, turbo to elbow not hugely long ago, hmm maybe a year actualy so some of those may be ok. The downpipe is new so i'm hoping (fingers crossed) that it'll come with gaskets.
The bits should come this week sometime but what is your availability mate
Hey dude, my turbo gaskets have gone and need replacing. As I work stupid hours the car would need to be collected and delivered back after. Also I would like a check over of the car and check all is well. How much would all this be and when you would be able to do it?
Cheers
chris
Im thinking of fitting an s14a auto diff to my manual s14a,
could you provide a price too supply and fit it please mate,
drop me a pm please
Hi
Iv fitted energy suspension bushes to my diff but threw away the 2 washers I need to keep
Can you sort something out for me please?
pics of what I need:
http://www.sxoc.com/vbb/showthread.p...96#post5401296
Im thinking of fitting an s14a auto diff to my manual s14a,
could you provide a price too supply and fit it please mate,
Fitting would be £60 + £10 oil + the diff, prices are about £80-£100.
could you also sort some rust on the front of my front suspension turrets, would need cutting out, small plate made up and re welding? Id do the priming and painting afterwards, so just the metal work
All sorted in a mater of minutes by a very genorous polo
One day when I have enough power to bust my gearbox regularly il come see you, big thanks