Results 1 to 11 of 11

Thread: injectors

  1. #1
    Guest
    Join Date
    Jul 2008
    Location
    essex
    Posts
    707
    Rides
    0

    injectors

    had a search and cant find a guid to changing injectors can any one tell me if its easy or hard and will i need a guide to do it thanks

  2. #2
    Banned sideways14a's Avatar
    Join Date
    Apr 2003
    Location
    Drunk as usual
    Posts
    34,697
    Rides
    0
    Its not an epically difficult thing but you have to get it right or you will have fuel pissing out.
    Basically its plenum off,
    Caps of injectors (bastard lol use a very good screw driver)
    pull out squirters
    Put new ones in with plenty of lube and most definitely new orings
    Put back together and watch carefully for leaks.

    Ohh and of course any bigger injectors need a remap right away as the car will seriously over fuel on stock map.

  3. #3
    Guest
    Join Date
    Jul 2008
    Location
    essex
    Posts
    707
    Rides
    0
    im putin in reconed ones as mine have been in there 130000 miles and think it might be causing a miss fire as plugs colis have not cured it so im thinkin its a fueling problem only one way to find out i guess thanks dude

  4. #4
    Banned
    Join Date
    Aug 2009
    Location
    essex
    Posts
    593
    Rides
    0
    Quote Originally Posted by Josh S14a View Post
    im putin in reconed ones as mine have been in there 130000 miles and think it might be causing a miss fire as plugs colis have not cured it so im thinkin its a fueling problem only one way to find out i guess thanks dude
    have you tried the ignition amp? and checked the plugs?

  5. #5
    Guest
    Join Date
    Jul 2008
    Location
    essex
    Posts
    707
    Rides
    0
    wat do you mean i not very tecnial minded lol

  6. #6
    Banned
    Join Date
    Aug 2009
    Location
    essex
    Posts
    593
    Rides
    0
    well, have you checked/changed the spark plugs? and have you tried another ignition amplifier? they are a pretty common cause of missfires.

    also, where is it missing in the rev range?

  7. #7
    Guest
    Join Date
    Jul 2006
    Location
    birmingham/southampton
    Posts
    3,398
    Rides
    0
    Quote Originally Posted by Josh S14a View Post
    wat do you mean i not very tecnial minded lol
    sounds like you should hand the job over to someone else then

  8. #8
    Banned
    Join Date
    Aug 2009
    Location
    essex
    Posts
    593
    Rides
    0
    Quote Originally Posted by S3 1MDl View Post
    sounds like you should hand the job over to someone else then
    everyone has to start somewhere.

  9. #9
    Guest
    Join Date
    Jul 2006
    Location
    birmingham/southampton
    Posts
    3,398
    Rides
    0
    yeh i agree, was not being condoscending it just fuellings not where to start and i personally would leave it to someone else

  10. #10
    Banned sideways14a's Avatar
    Join Date
    Apr 2003
    Location
    Drunk as usual
    Posts
    34,697
    Rides
    0
    IF he follows the FSM and chat on here about it then its not going to be a problem, only thing you have to be aware of is leaks and that's why you must use new rings and lube it all up properly.

  11. #11
    Guest
    Join Date
    Jan 2007
    Location
    cambridge
    Posts
    1,134
    Rides
    0
    are you running any mods or a chip ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •