S13 cooling panels

**EPRacing** · 20-09-2010, 16:10

I dont really know why there is a problem with this item as far as I know they seem to be ok. Might need to ask a friend to pop round with their car one day to do a test fitment on the item just to get to the bottom of it.

**EPRacing** · 23-09-2010, 17:36

I have test fitted on a friends S13 today and took some pictures.

the fitment on the cooling panel is fine but there is a few small issues we did have.

initial first line up on the car with the rad brackets remove and the rubber stopper remove. (not in this pic yet :P)

Alot of the holes on the cooling panel needs to make it bigger (most of them is about 2 drill size bigger). to do this you will need to masking tape the holes in the cooling panel and then use a bigger drill bit. but if you have one of those triangle shape drill bits those are the best ones to use.

Another problem we have was the bumper bracket that needs to trim down because it hits the back of the cooling panel and crack it as we did the test fitment when bolting it down.

(lucky I use the courier damage one so.. no bother

)

the red circle is where it has crack the panel.

After taking off the bracket here is the problem.

Pic of the bracket.

After some light grading and filing we put the panel back in bolt it up and put the rubber stoppers back on and sits very well but it does raise little but nothing too bad as the bonnet shuts first time .

hope this will help the members who had problems with the panel. but if you have any more problems give us a shout and will do my best to help out.

Now is just waiting for my mate with the S14A to come back so I can do the same on it and hopefully sort out the problem on that.

Leon.

**ginger-j** · 23-09-2010, 17:50

Is it to late to get in on this at 70

**NickS13** · 23-09-2010, 18:12

ah cheers leon, i think i seen were my problem was now. the bumper bracker been one of them. will let you know how my fitting goes over the weekend.

cheers

**dykkerdahl** · 23-09-2010, 18:42

Hi Leon

Mail sendt

**user23456** · 11-11-2010, 14:21

are there any more of these?

**EPRacing** · 13-11-2010, 11:05

yes I still have some in stock.

**ian g sr20** · 11-12-2010, 22:16

how much posted 2 ireland

**EPRacing** · 14-12-2010, 14:50

postage to southern Ireland will be £20.00 through parcel force.

**ginger-j** · 14-12-2010, 14:56

Will they still be 70?

**EPRacing** · 15-12-2010, 16:06

I can still do one for £70.00 mate. but it will be the last one.

**EPRacing** · 15-03-2011, 16:07

I have got 2 here that has courier damage. if anyone interested in them I can do them for £30.00 + delivery on it.

the crack is at the corner of the left hand side.

Leon.

**dreamdim** · 25-03-2011, 08:21

Originally Posted by EPRacing

I have got 2 here that has courier damage. if anyone interested in them I can do them for £30.00 + delivery on it.

the crack is at the corner of the left hand side.

Leon.

how bad are the crack? have you got a pic?

**Rubix_Cube** · 18-07-2011, 16:31

Originally Posted by EPRacing

I have test fitted on a friends S13 today and took some pictures.

the fitment on the cooling panel is fine but there is a few small issues we did have.

initial first line up on the car with the rad brackets remove and the rubber stopper remove. (not in this pic yet :P)

Alot of the holes on the cooling panel needs to make it bigger (most of them is about 2 drill size bigger). to do this you will need to masking tape the holes in the cooling panel and then use a bigger drill bit. but if you have one of those triangle shape drill bits those are the best ones to use.

Another problem we have was the bumper bracket that needs to trim down because it hits the back of the cooling panel and crack it as we did the test fitment when bolting it down.

(lucky I use the courier damage one so.. no bother

)

the red circle is where it has crack the panel.

After taking off the bracket here is the problem.

Pic of the bracket.

After some light grading and filing we put the panel back in bolt it up and put the rubber stoppers back on and sits very well but it does raise little but nothing too bad as the bonnet shuts first time .

hope this will help the members who had problems with the panel. but if you have any more problems give us a shout and will do my best to help out.

Now is just waiting for my mate with the S14A to come back so I can do the same on it and hopefully sort out the problem on that.

Leon.

Thanks for this....just went to fit mine after almost a year and it was a bit of a pain.... I didnt realise the wee edges on the bumper bracket. I'll sort them next.

**dreamdim** · 26-09-2011, 20:32

is it still possible to get one of those an at what price? cheers

**EPRacing** · 27-09-2011, 12:48

Originally Posted by dreamdim

is it still possible to get one of those an at what price? cheers

Thank you for your interest,
however, we are currently out of stock on this CF Cooling Panel.
We have only got 2 that are slightly damaged on the corner

Please let us know if you are interested in those slightly damaged one,
We can email you with some pictures.

Regards,
Angus

**dreamdim** · 27-09-2011, 21:09

yeh might be interested. what is the price for them? can you post a pics here? cheers

**dreamdim** · 04-11-2011, 09:47

any pics ?

**dreamdim** · 05-12-2011, 09:56

?

**EPRacing** · 19-12-2011, 18:11

HI there

the badly damage ones are gone already. but I have 2 that is very very lightly damage ones.

First one:

Second one:

As you can see in the pic, they are so very lightly damage and you cant really see it in the photos so I circle them to make it easier for people to see where the damage is.

The price for those are £55.00 each + delivery.

if interested let me know.

Leon.

Thread: S13 cooling panels

Thread Tools

Posting Permissions