Page 45 of 45 FirstFirst ... 35434445
Results 881 to 896 of 896

Thread: my s14a project thread :)

  1. #881
    Guest nash`s's Avatar
    Join Date
    Jan 2008
    Location
    croydon
    Posts
    3,307
    Rides
    0
    thought id update this seeing as i haven't done an update for a while. no real changes to the car in 2017 sadly but thought id share some pics from the last year.

    few random shows and meets.
    Untitled

    Untitled

    Untitled

    Untitled

    Untitled

    Untitled

    Untitled

    Untitled

    Untitled

    can't remember if i mentioned this before or not but i had someone contact me a while back to ask if i wanted my engine bay to be used in a racing game app (csr2). so the guy came to photograph the car.
    Untitled

    and a few months later the engine was put into an s15.
    Untitled

    Untitled

    started to collect parts for a suspension overhaul.

    first few bits to arrive were some ikea formula arms
    Untitled

    then the coilovers
    Untitled

    Untitled

    then the rest of the ikeya arms. only arms I'm missing are rear lca's which ill probably do at a later date.
    Untitled


    should transform the handling nicely
    Untitled

    been advised to add an additional clear coat as they tend to not to like uk roads. so last weekend added some lacquer.

    Untitled


    also decided to go for wider front wings. not sure if these will stay on the car or not yet.

    Untitled

    Untitled

    Untitled


    more updates soon hopefully

  2. #882
    Guest ianlea73's Avatar
    Join Date
    May 2007
    Location
    Bristol
    Posts
    3,541
    Rides
    0
    Bloody Wow!

  3. #883
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,381
    Rides
    1
    Such a sweet car this, love it.
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  4. #884
    Guest nash`s's Avatar
    Join Date
    Jan 2008
    Location
    croydon
    Posts
    3,307
    Rides
    0
    wow! been a while since the last update

    so the spring of 2017 i bought these.
    Untitled

    have always wanted a set of meisters and managed to pick these up for a decent price. the rear lips were in need of a refurb so before i decided to split them had to have a quick test fit.
    Untitled

    the rear fitted almost spot on, had to run a small spacer to clear the callipers but all in all a decent fit (note the rear damaged lips). the fronts on the other hand were a problem from the start. meisters have always been known for having shite brake clearance so fitting them over my 356mm brake kit was always going to be a challenge. with a 25mm spacer they clear the callipers with 1-2mm space

    Untitled

    this was one of the main reasons for going for the winder front wings so fast forward to this time last year i got round to fitting the wheels with the new wider front wings. much better (ignore ride height lol), still a little poke but with some camber should be fine.

    Untitled

    right onto the rebuild time

    Untitled

    decided to split all four wheels even though the fronts were pretty mint, didnt want to risk getting the new gloss black a slightly different shade of black.
    Untitled

    the faces and barrels actually cleaned up really nice so they didnt need touching at all luckily.

    Untitled

    lips came back from powder coaters.

    Untitled

    bolts took ages to clean all the old loctite off. looked brand new once done though did however decide to replace all the nuts.
    Untitled

    wheel porn all back together along with new decals and also replaced with a couple of new valves.
    Untitled
    Untitled
    Untitled

    new rubber.
    Untitled


    one thing i dislike about meisters is the lack off centre caps so went about making my own. measured up the dimensions and eventually found some which would work. lovely chrome ones at that

    Untitled

    painted them in some satin black, much better!

    Untitled

    also sourced some logos for the centres

    Untitled

    really pleased with how they came out, finishes off the wheels just right imo. (still protective film on logo)

    Untitled

    thats it for tonight. one last thing, managed to source some 2nd hand professional garage flooring for the unit. makes such a big difference working on the cars. pic was during laying it and before cleaning it.

    Untitled

  5. #885
    Guest Sean-B's Avatar
    Join Date
    Sep 2010
    Location
    West Midlands
    Posts
    2,467
    Rides
    0
    Wheels are cool, not sure if I prefer them on your build to the LMGT4s though.

    That flooring is amazing isn’t it, not sure how I got on without it. Jealous of the garage space you have!

  6. #886
    Guest nash`s's Avatar
    Join Date
    Jan 2008
    Location
    croydon
    Posts
    3,307
    Rides
    0
    Quote Originally Posted by Sean-B View Post
    Wheels are cool, not sure if I prefer them on your build to the LMGT4s though.

    That flooring is amazing isn’t it, not sure how I got on without it. Jealous of the garage space you have!

    ill be honest I'm still a little unsure myself. ill never sell the lmgt4s so won't be hard to put it back to how it was

  7. #887
    Guest nash`s's Avatar
    Join Date
    Jan 2008
    Location
    croydon
    Posts
    3,307
    Rides
    0
    moving on to installing all the suspension components. The only ikeya arms the car is now missing are the rear LCA's so far now I've decided to just paint the standard arms to match the others.
    Untitled

    also decided to freshen up the ARB's so had them powder coated.

    Untitled

    the whole rear end went on fine.

    Untitled

    Untitled

    the front was a much bigger headache. put all the arms on fine got the alignment sorted roughly by eye lowered it down and the front was sitting too high. so lowered the coilovers as low as they could go and still wasn't quite as low as id like.
    Untitled

    spoke to BC racing to see what my options were, and they advised me shorter springs wouldn't make a difference so my only option was to either go for shorter bodys or sell the coilovers and go for something different. the shorter bodys worked out to be pretty expensive so i had a little think and come up with the idea to lower the car more with some aftermarket drop knuckles. went for the geomaster 3's. the lower the car a further 40mm iirc. also helps keep all the other arms angled to more stock position so helps with bump steer/ roll centre etc.
    Untitled
    Untitled

    nice and straight forward to fit and achieved a much better ride height.
    Untitled
    Untitled

    rolled the car out of the unit and went down to my yards entrance to make sure the car cleared the speed hump

    Untitled

    Untitled

    so with the all clear on the speed hump the ride height was now set. lost count of the amount of times the i had all the front end components apart to make changes or adjustments so was a relief to finally have it all set and done.

    not a great pic but gives you a rough idea how close the brakes are to the wheels.

    Untitled

    before i sent the wings off for paint i made a gamble with some wing mirrors that came up for sale. have wanted gandors for some time now so when these came up i enquired if they were genuine or not, the guy was unsure if they were so with the pics he sent me they looked genuine to me. few days later they were sitting in my hands and i was itching to inspect the backs of them.
    Untitled

    scratched off a load of paint and voila result!!
    Untitled

    so along with the wings these were sent off for paint a couple days later. painter done a fantastic job as always.
    Untitled
    Untitled

    wings were back on too along with the side skirts
    Untitled
    Untitled

    well pleased with the final result. had the car aligned and mot'd just in time for the end of summer lol

    last couple additions to the wheels were some genuine works dust caps and wheel nuts. finishes the wheels off nicely.
    Untitled
    Untitled
    Untitled

  8. #888
    Guest nash`s's Avatar
    Join Date
    Jan 2008
    Location
    croydon
    Posts
    3,307
    Rides
    0
    thats everything up to date i think now. will just leave you with a few random pics from the summer. only changes i had to make was dropping to a lower profile tyre on the front as was a little too much rubbing for my liking. have only driven the car once on the new tyres and it seems to be better but its still early days.
    Untitled
    Untitled
    Untitled
    Untitled
    Untitled
    Untitled

  9. #889
    Guest Sean-B's Avatar
    Join Date
    Sep 2010
    Location
    West Midlands
    Posts
    2,467
    Rides
    0
    Lovely work.

    So are those the new geomasters that don’t have 0 Ackerman?

  10. #890
    The Welsh Whinger! pdh 14a's Avatar
    Join Date
    May 2004
    Location
    Swansea
    Posts
    24,624
    Rides
    0
    Amazing car,loving the updates mate

    You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.

    And if you can't fix it with a hammer,you've got an electrical problem!

  11. #891
    Guest nash`s's Avatar
    Join Date
    Jan 2008
    Location
    croydon
    Posts
    3,307
    Rides
    0
    Quote Originally Posted by Sean-B View Post
    Lovely work.

    So are those the new geomasters that don’t have 0 Ackerman?
    these are the most recent geomasters. and yes they reduce the ackerman significantly. with the geomaster 3's you have two alternative settings. street drift/track-grip and then extreme drift use. i have mine setup in the track setting, as have no intentions in drifting the car at all. i'd imagine the ackerman angle isn't as good as it could be in the setting I'm running.

    Quote Originally Posted by pdh 14a View Post
    Amazing car,loving the updates mate
    cheers bud

  12. #892
    Guest Sean-B's Avatar
    Join Date
    Sep 2010
    Location
    West Midlands
    Posts
    2,467
    Rides
    0
    So have you found it much different to drive with them fitted? Heavier steering or less turn in?

  13. #893
    Guest BLAKTOOTH's Avatar
    Join Date
    Jul 2007
    Location
    Benfleet, Essex
    Posts
    4,783
    Rides
    0
    Nash!!! Are you and this car still alive? I demand an update. Please

  14. #894
    Guest nash`s's Avatar
    Join Date
    Jan 2008
    Location
    croydon
    Posts
    3,307
    Rides
    0
    Hi mate yes still alive . still have the car yes, but sadly doesn't really get used much these days. probably only done 1000-1500 miles in the last 3 years. Unfortunately since its not been used much there isn't really much to update on the build. So ill just leave a couple pics from a couple meets and shows it did attend over the last few years.

    Untitled

    Untitled

    managed to win 2nd best in show at japanese performance show a couple years back.

    Untitled

    Untitled

    Only mods i have done to the car since the last update are some OEM wind deflectors.

    Untitled



    new K&N filter.

    Untitled

    decided to bring them lmgt4's out of retirement.



    Also the clutch decided to shit itself whilst out on a project for recording the sr20det audio for the newest need for speed video game so have replaced the clutch for a new OS Giken twin plate. Didnt get any pics of the clutch or install sadly. And thats all the updates i have, the car has only been driven once since the clutch install so still needs to be bed in. Car has been sat in storage since august 2021 but hoping to get it out to some meets this year fingers crossed.

    Oh and the car is now back on the miesters again lol.

  15. #895
    Guest BLAKTOOTH's Avatar
    Join Date
    Jul 2007
    Location
    Benfleet, Essex
    Posts
    4,783
    Rides
    0
    He lives!!! Sorry mate, totally missed your reply. Super pleased you still have this beauty. The Miesters are sweet but your car just looks sooooo right with the LMGT4's!

  16. #896
    living on the edge p.nicholas's Avatar
    Join Date
    Jan 2002
    Location
    Essex meets
    Posts
    6,159
    Rides
    0
    Are you affected by the ULEZ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •