Results 1 to 2 of 2

Thread: Mazworx SR Head Studs/ Main Studs

  1. #1
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0

    Mazworx SR Head Studs/ Main Studs

    INSTOCK NOW! READY TO SHIP!


    We are proud to introduce our line of head studs and main studs for the SR. We have to come to realize that the engagement on the ARP off the shelf ones dont thread into the block completely and not bottoming out so it does not giving enough grab. So with these we developed will be the correct length and actually stronger and better material. We estimate an easy 600hp capability.Main differences between the current ARP head studs and main studs material to the material of our headstud kit.

    ARP current head stud/main stud
    8740 CHROME MOLY: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi.

    Mazworx Headstud/Main stud material

    ARP2000®: An exclusive, hybrid-alloy developed to deliver superior strength and better fatigue properties. While 8740 and ARP2000 share similar characteristics – ARP2000 is capable of achieving clamp loads in the 215,000-220,000 psi range. ARP2000 is used widely in short track and drag racing as an up-grade from 8740 chrome moly in both steel and aluminum rods. Stress corrosion and hydrogen embrittlement are typically not a problem, providing care is taken during installation.

    Made from ARP2000 material
    12 point
    220ksi tensile strength
    Straight shank/bullet ends from complete bottom out
    Comes with (10) studs, (10) washers, (10) nuts and instructions.

    The main studs WILL CLEAR upper oil pan without machining!

    Head stud comparison. Std ARP off-the shelf, Mazworx Head Studs, Mazworx 1/2"







    Main Stud Comparison

    ARP off the shelf, Mazworx Main







    Head Stud Kit - $235.00USD shipped
    Main Stud Kit - $235.00USD shipped

    Or by both for $420.00USD shipped!
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  2. #2
    Guest
    Join Date
    Mar 2005
    Location
    Israel
    Posts
    407
    Rides
    0
    Hi,

    Pm`d you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •