Roughly how much is it to get an exhaust and downpipe fitted at a garage. I got quoted 250! from a garage that's on here APT Norwich
Surely it's a couple of hours work 100 tops?
Roughly how much is it to get an exhaust and downpipe fitted at a garage. I got quoted 250! from a garage that's on here APT Norwich
Surely it's a couple of hours work 100 tops?
250 is abit steep dont take long if its just from elbow to back box do it your self for free its easy
Is that with them supplying the exhaust as well as seems a bit steep. If its a decent exhaust which wouldnt need modifying to get to fit then can fit yourself easy. A bit tight if on axel stands but only a few hours work if that. Most garages charge about £40 an hour and on a lift it would probably take them about an hour.
It's an apexi N1 and a HKS downpipe. I said i have all the gaskets, hangers, mounts and bolts too!
£250 if they were doing the elbow too perhaps lol. If I were you, I'd just do it myself . Go into quick fit (or your nearest exhaust place), slip them £20 and ask them to undo the 3 nuts on the elbow>downpipe, then lightly tighten them back up with a socket to get you home, and that should be the worst of the job done .
from the turbo elbow (downpipe) and decat/cat back - its 2 hours work with plenty brew breaks so max of £100.
go to a local back street garage and get them to do it or do it yourself
i got quoted £60 years ago and decided to put that £60 towards a £100 halfords 150pc tool kit and did it myself in under an hour. you need a bloody long extension bar do get to the downpipe from the engine bay, otherwise it's a very easy job
Im guessing APT are very busy and don't have time to get another car in and lose a few hours on it, it's common in all trades to do this when busy it saves turning work down
Get your old clothes on pop down halfords and pick a jack and some axle stands up and DIY
Should take no more than 1Hr to fit and have a cuppa
If you live in a Cul-de-sac like me, park the car with OS wheels up on the curb, and that gives you an extra 3-4 inches underneath the car to play with - just enough for my 'racing snake' figure .
You could buy all the tools you need to do the job for half that price!
Il do it for £50
£250!! you sure we quoted that just for a downpipe and exhaust
yes we are busy but i wouldnt just over price work to turn it away
---------------------------------------------------
Automotive Performance Tuning - Tel:01603 870990
Email: sales@ap-tuning.co.uk
FAST ROAD SPEC SR20'S from £3200 Details Here
Power FC Mapping - **Current remap deal!**
You said it was manifold too!! LOL.
little off topic sorry guys
christian is there any news regards my gizzmo controller?
guys guys guys guys.. dont pass any comments on APT's price cos gary will poo his pants and press the report button.. (this is a wind up gary, chill)
Ah, that will bump the time up by quite alot!