1000cc injectors

**redlinezak** · 15-08-2009, 12:31

Hi guys can you give me a delivered price for 4x1000cc injector dynamics injectors. They will be going on a blacktop SR20DET from an S14. I already have a top feed rail and plenum etc but are all the holes in the rails for the injectors pretty much standard? Also can you supply the electrical plugs to fit these?

Thanks

**MazworxRacing** · 17-08-2009, 13:08

What size are you fuel rail injector holes?

**redlinezak** · 17-08-2009, 16:33

i will probably be buying a new cheapie rail from ebay (moneys tight). I think they state that they are suitable for 10.5 or 11mm?

http://cgi.ebay.com/ebaymotors/top-f...Q5fAccessories

Thats just an example. Unless you can supply similar of course

Would be nice to get it all from one place

Cheers

**MazworxRacing** · 17-08-2009, 17:59

I can do them for 481.95 USD shipped to you.

**Aj82** · 18-08-2009, 06:44

Is that including a top feed rail?

Redlinezak- there is a top feed rail on eghey.co.uk that i have been looking at recently, might be worth a look mate. Cant remember if it states hole sizes though?

Cheers Aj

**redlinezak** · 18-08-2009, 06:57

If you have a link AJ that would be great cheers.
As AJ said Mazworx is that price including a rail??

**Aj82** · 18-08-2009, 07:03

I will see if i can re-find it, im at work and already meant to be working! haha

I think it was from a company called racespec, iv ordered from them before and where very fast etc. Not sure on the quality of the rail though, but by the look of the one you have posted above they look to be about the same.

Cheers Aj

**redlinezak** · 18-08-2009, 13:51

Ok cheers mate
Im struggling to see what can be built wrong with a fuel rail - as long as all the holes are the correct size etc?

Cheesr

**MazworxRacing** · 18-08-2009, 15:16

That price doesnt not include a fuel rail. Just the injectors.

We have a top feed rail but not 100% sure if it will work or not. It should line up fine just need brackets made to bolt onto a GReddy or stock intake plenum

**redlinezak** · 18-08-2009, 16:29

it will be going onto a JUN style plenum

**MazworxRacing** · 18-08-2009, 20:48

Originally Posted by redlinezak

it will be going onto a JUN style plenum

Is it an ebay item?

**redlinezak** · 18-08-2009, 22:00

it is a KU engineering plenum that i believe was originally for a redtop SR20DET and has been modified to fit a blacktop (water jacket modification i think)

**Aj82** · 19-08-2009, 06:49

Originally Posted by redlinezak

Ok cheers mate
Im struggling to see what can be built wrong with a fuel rail - as long as all the holes are the correct size etc?

Cheesr

It wasnt so much if it was built wrong, more the quality of the product i was concerned about?
Mazworx, what kind of brackets would be needed to make your rail fit Greddy plenum?
I didnt think i would be so difficult to find a top feed rail that could be bolted to any manifold whether it be Greddy, KU, JUN.

Cheers Aj

**redlinezak** · 19-08-2009, 07:04

Yeah i kinda didnt phrase my post very well. Im not sure how the quality can be bad on an injector rail was more the correct way of saying it (im not saying it isnt bad but i just cant see what parts there are that might be)?

Cheers

Also mazworx - if i were to purchase the injectors are you able to supply the infiormation i would need to enter into the power fc to get them to run correctly (lag correction)

**Aj82** · 19-08-2009, 07:07

The way its drilled and the material used and the quality of the fittings i would hope to be very high due to the fact its what will be holding your fuel pressure? Wouldnt want a leak followed by a nice fire would we mate! lol

Cheers Aj

**redlinezak** · 19-08-2009, 07:11

lol yeah i guess you may be right there AJ lol. now you have me worried lol

**Aj82** · 19-08-2009, 09:21

Haha, sorry mate. Just letting you know the things i have been thinking of. Wouldnt want to see you get some bits, fit them and then find out they werent upto the job and your engine and hard work go up in flames.

Cheers Aj

**redlinezak** · 19-08-2009, 10:06

seeing as they are only peanuts i might get one in to check the quality. At least it might give others an idea of what to expect.

Cheers

**MazworxRacing** · 19-08-2009, 13:30

Are we talking about a GReddy plenum for the S14? The problem is that some of these plenum have injector bungs for side feed injectors which is slightly wider base and they wont sit right in there. If you just throw a rail in there, it might end up hitting the hood. (bonnet)

We can offer 2 style kits. Our rail with with just the brackets will be 140.00 USD or the rail with brackets and weld on bungs for the manifold for 225.00USD.

**redlinezak** · 19-08-2009, 16:34

i think for the moment i will just go with the injectors from you cheers. I will worry about the fuel rail later if the ebay one doesnt fit

I will let you know when i wish to order

Thanks

Nathan

Thread: 1000cc injectors

Thread Tools

1000cc injectors

Posting Permissions