Page 1 of 122 1231151101 ... LastLast
Results 1 to 20 of 2432

Thread: My constant work in progress 14a with added jdm'ness!!!

  1. #1
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1

    My constant work in progress 14a with added jdm'ness!!!

    I am sure that most people have seen pictures of my car on here before but I thought that It was about time I bore you all with them again and keep them all in one place

    This is the car when I bought it



    Looks much the same as it does now to be fair.
    This happend shortly after I bought it while I was waiting in line at the post office to tax the car



    While trying to source a new bumper I decided to treat myself to a 6000k hid headlight kit from HD as the stock lights are hopless and I'd heard many good things about this kit

    These are a great upgrade and make you realise quite how bad the standard lights are





    Ever since I bought the car it felt a little sloppy from the rear end. I decided to try and tighten the back end up by fitting some whiteline "pineapple" subframe locking colars like these.



    While fitting these I managed to snap one of the main subframe mounts like the ones highlighted in the pic



    Nissan obviously didn't forsee this being an issue as they made them so they weren't accessible and also not a replaceable part. I managed to get a member on here to cut one out of their car that was being broken and then set about trying to repair mine.









    After we got this sorted I got my new front bumper and rear numberplate surround sprayed up for the bargin price of £100. I think the colour coded number plate surround makes a big difference to the look of the back end



    It was at this point that I became addicted to underbonnet bling

    Within a few months my engine bay went from this:



    To this:



    .

    I have done plenty else to to the car also including:
    .Exedy extreme organic clutch and skimmed standard flywheel
    .DBPower uprated gearbox mount
    .Egay shortshifter
    .Front + Rear strut braces

    Plus more that I have forgotten.

    Last edited by Chriscooke; 07-03-2010 at 22:49.
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  2. #2
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1

    My constant work in progress 14a with added jdm'ness!!!

    A vid from my first rolling road day at circuit motors with the west country sxoc guys



    And the result, all be it a bit poor and at 13psi.





    I have since had it retested after a bit more work at a still weak but better 254 bhp/262 lbft @ 1bar. I am desperately in need of a remap as it's running really rich at the top end and killing my power aparently.

    I should be fitting these in the near future, along with rebuilt calipers larger yellow stuff pads and braided lines all around.



    I also have my Sard R2D2, Apex catch tank, SRB z edition rear valance and a full apex alignment arm set to get fitted

    Last edited by Chriscooke; 06-11-2009 at 21:20.
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  3. #3
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1

    My constant work in progress 14a with added jdm'ness!!!

    And at a couple of events.

    Japfest 09



    Devon car show 09



    Devon car show 08 in the background



    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  4. #4
    Guest Sideways Simon's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Aus
    Posts
    3,264
    Rides
    0
    The engine bay looks well!!

  5. #5
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    Quote Originally Posted by Sideways Simon View Post
    The engine bay looks well!!
    Cheers mate. It's all show and no go under there at the moment tho. I'll try and change that asap tho.
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  6. #6
    Guest
    Join Date
    Jan 2009
    Location
    essex
    Posts
    261
    Rides
    0
    gold rocker cover looks the nuts! is it sprayed or powder coated? deffo gonna do mine gold now

  7. #7
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    Cheers mate. It's sprayed with halfords rattle cans It's all in the prep as ideally you need to strip all of the old black paint off and start again using an ally primer, light coats with a rattle can and then a matchin laquor
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  8. #8
    The Welsh Whinger! pdh 14a's Avatar
    Join Date
    May 2004
    Location
    Swansea
    Posts
    24,629
    Rides
    0
    Looking good Buddy! Excellent work on her

    You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.

    And if you can't fix it with a hammer,you've got an electrical problem!

  9. #9
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    Cheers Paul. It's never ending.

    All being well we might be getting the brakes fitted this weekend at a little sxoc mini meet
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  10. #10
    Guest
    Join Date
    May 2005
    Location
    Newcastle
    Posts
    5,120
    Rides
    0
    looking good chris

    thats a very tidy engine bay you have the , do you still use a wmic?

  11. #11
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    Quote Originally Posted by Ricey View Post
    looking good chris

    thats a very tidy engine bay you have the , do you still use a wmic?
    Cheers mate. I made the mistake of going for the type 2 fmic. I wish I had gone for the type 1 as it just looks that much better
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  12. #12
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    My spec list including the parts I have yet to fit

    Engine & Transmission

    254 bhp/262lbft - Awaiting a remap. Should see 280bhp/300lbft

    Apex type 2 Front Mount Intercooler
    Stanless hot pipe
    Stainless cold pipe kit
    Apexi Air filter
    Stainless cold air induction box
    Manual boost controller @ 15psi
    Sard R2D2 dump valve
    Apex Oil vapour catch tank
    Exeedy extreme organic clutch
    2fast2cool Short shifter
    Uprated gearbox mount
    Walbro 255 Lph fuel pump
    NGK BKR-7EIX spark plugs
    DB power engine damper
    Straight through stainless steel Mongoose exhaust
    Painted Rockercover
    EFL stainless cooling pannel
    EFL Stainless fusebox cover
    EFL stainless coilpack cover

    Chassis

    Standard shocks with -30mm Eibach springs
    Whiteline pineapples subframe locking kit
    Apex front upper strut brace
    Apex rear upper strut brace
    Apex rear lower brace
    Apex rear camber arms
    Apex rear toe arms
    Apex rear traction arms
    Apex front tc arms
    Godspeed antiroll bars
    Uprated ARB droplinks
    DBpower Brembo 345mm grooved front Big brake kit
    Braided front brake lines
    Larger Yellow stuff pads
    DBpower BMC stopper
    Brembo grooved rear disks
    Braided rear brake lines
    Brembo brake pads
    18" Nissan 350z wheels
    Falken 452, 225/40/18 front + 245/40/18 rear tyres


    Exterior

    Navan 3 piece rear spoiler
    SRB Z edition rear valance
    Clear front + side indicators
    Colour coded rear number plate surround
    Colour coded center brake light
    Horsham developements 6000k Hid headlights
    Crystal sidelights
    Import style front numberplate
    Silvia Bonnet badge

    Interior

    Prosport stepper boost gauge
    Lockwood 200sx sill gards
    Sony CDX-GT929U headunit
    Infinity rear speakers
    __________________
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  13. #13
    Guest Paulpen's Avatar
    Join Date
    Jan 2007
    Location
    Somerset
    Posts
    3,537
    Rides
    0
    About time you got a project thread up chap

    Tis looking good

    Not seen as many 200's around town recently mind

  14. #14
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    Quote Originally Posted by Paulpen View Post
    About time you got a project thread up chap

    Tis looking good

    Not seen as many 200's around town recently mind
    Yeah I got bored last night mate so thought I would start one. Not much to see mind

    The only 200's I ever see at the moment are that white 14.5 I keep seeing and a couple random s13's.
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  15. #15
    Guest D1 RWD's Avatar
    Join Date
    Sep 2006
    Location
    bucks
    Posts
    7,184
    Rides
    0
    nice clean looking car mate, just needs some nicer wheels imo but apart from that looks really nice

  16. #16
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    Quote Originally Posted by d1 rwd View Post
    nice clean looking car mate, just needs some nicer wheels imo but apart from that looks really nice
    Cheers mate. The wheels are definately on the to do list. I am getting the handling/braking sorted first tho Not entirely sure what wheels to go for yet.

    I am very very tempted to get some rota's to annoy people tho
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  17. #17
    Guest swiftmini's Avatar
    Join Date
    Jun 2008
    Location
    Exeter
    Posts
    4,518
    Rides
    0
    Nice one for starting a thread

  18. #18
    Guest swiftmini's Avatar
    Join Date
    Jun 2008
    Location
    Exeter
    Posts
    4,518
    Rides
    0
    Nice one for starting a thread

  19. #19
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,369
    Rides
    1
    Quote Originally Posted by Swiftmini View Post
    Nice one for starting a thread
    Cheers mate. It's a bit dull and much the same as everyone else has/is doing to their 14/a tho.


    I have been thinking about getting some spacers to make my wheels a little more acceptible until I can afford some new ones.

    Can anyone recommend where to get some decent bolt on spacers that don't cost the earth?

    I am thinking that a 20mm spacer might be a bit much on the back as iirc it would bring my wheels to ET15 and then I would be needing some arch work which I can't afford at the moment although I will need it for my next rims
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  20. #20
    Guest
    Join Date
    May 2006
    Location
    Just outside Dundee
    Posts
    5,450
    Rides
    0
    Looking very nice mate. Top effort!


    Cheers Aj

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •