the main cap arp studs
the main cap arp studs
ahh ok, I'm staying standard with those I think.
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Another small part arrived today, sr20de throttle body, prob won't make a massive difference but it all helps.
Sent from my iPhone using Tapatalk
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Collected another piece of the puzzle at the weekender.
87mm cp pistons with thanks to stu at Garage SR
The engine is off to the garage on Monday too so fingers crossed it's not too bad inside.
Sent from my iPhone using Tapatalk
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Awesome buddy.
Whats the Plan ?
I need to rip mine out for a full forged set-up !
Need a lottery win first ! ha
Engine should be coming apart next week to be checked and go for machining hopefully. If the crank etc is good I can then look to order the bearings and start putting it back together. Going to run my current turbo etc until funds allow
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
If crank is bad???? Stroker????
Sent from my SM-N9005 using Tapatalk
Don't know anything about stroker cranks. Don't want to look in to that either as my crank will be fine.... I hope
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Let's hope then.
Sent from my SM-N9005 using Tapatalk
Yeah just looked. New Oem crank would be the way forward.
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Progress, took the engine to my mates workshop and just over an hour later it looked like this.
Everything has been marked and separated ready for when it goes back together so it goes back together intbe right order
Sent from my iPhone using Tapatalk
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Much damage?
Sent from my iPhone using Tapatalk
What was wrong with It? Looks like everything is in good nick. Those pistons look well clean!
Sent from my SM-G920F using Tapatalk
Big end bearings were toast, hopefully the crank is ok as don't really want to be buying a new one.
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Interesting progress as i'm pretty much at the same stage as you with the forging.
I'm interested in what clearance you measure from Piston to Block using those pistons. As i have the same ones and i'm not sure if my clearance is a bit too big.
CP give a minimum, but not a maximum clearance.
I'll see what info I get back from the builders and let you know
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
any news?
Not yet
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue